menu
Mehdi Fakoorsaghieh

Professor

Update: 2025-05-29

Mehdi Fakoorsaghieh

College of Interdisciplinary Science and Technologies / دانشكده مهندسي هوافضا (سازه هاي هوافضايي)

Journal Paper

  1. "Extension of von-Mises failure criterion for comprehensive mixed-mode I/II fracture assessment of orthotropic materials"
    Elaheh Kohestani, Mehdi Fakoorsaghieh
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 315, 2025
  2. "Higher-order asymptotic solution of bi-material V-notch with dissimilar hardening coefficients under plane strain condition"
    zahra nasiri, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 137, 2025
  3. "Simulating delamination in composite laminates with fracture process zone effects: A novel cohesive zone modeling approach"
    Zahra Shirzadeh, Mehdi Fakoorsaghieh, Zahra Daneshjoo
    ENGINEERING FRACTURE MECHANICS, Vol. 315, 2025
  4. "Developing a new mixed mode I/II fracture criterion for cracked functionally graded materials considering the fracture process zone effect"
    Sayed Mohammad Hossein Izadi, Mehdi Fakoorsaghieh, Babak Mirzavand
    ACTA MECHANICA, Vol. 236, No 1, 2025
  5. "Coordinated Control of Relative Orbit of Co-Location Geostationary Satellites Using Game Theory"
    Fateme Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    IEEE Access, Vol. 12, pp.196118-196132, 2024
  6. "Characterization of elastic modulus and fracture toughness of randomly oriented chopped glass fibers functionally graded materials"
    Sayed Mohammad Hossein Izadi, Mehdi Fakoorsaghieh, Babak Mirzavand
    STEEL AND COMPOSITE STRUCTURES, Vol. 53, No 1, 2024
  7. "A novel mixed mode fracture criterion for functionally graded materials considering fracture process zone"
    Sayed Mohammad Hossein Izadi, Mehdi Fakoorsaghieh, Babak Mirzavand
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 134, No 104710, 2024
  8. "Extension of Tsai-Hill failure concept for mixed-mode I/II fracture investigation of orthotropic materials considering T-stress effects"
    Ali Farahnak, Mehdi Fakoorsaghieh
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 302, No 112991, 2024
  9. "Non-local stress approach in conjunction with reinforcement isotropic solid model (NLS-RIS): an efficient orthotropic mixed mode I/II fracture criterion"
    Maedeh Habibvand, Mehdi Fakoorsaghieh
    ACTA MECHANICA, Vol. 235, No 9, pp.5697-5710, 2024
  10. "Systematic design of a wind turbine by Design Structure Matrix (DSM) method, case study: Lootak region"
    Alibakhsh Kasaeian, Kiana Rahmani, Mehdi Fakoorsaghieh, Amir Reza Kosari, Mohammad Hadi Katooli
    International Journal of Ambient Energy, Vol. 45, No 1, 2024
  11. "Assessing interfacial fracture in orthotropic materials: Implementing the RIS concept with considering the T-stress term under mixed-mode I/II"
    Zahra Khaji, Mehdi Fakoorsaghieh
    STEEL AND COMPOSITE STRUCTURES, Vol. 50, No 2, pp.237-247, 2024
  12. "Stochastic free vibration of composite plates with temperature-dependent properties under spatially varying stochastic high thermal gradient"
    Hadi Parviz, Mehdi Fakoorsaghieh
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 51, No 10, pp.5878-5901, 2023
  13. "In the ability to extend Hashin criterion for mixed mode I/II fracture assessment of cracked orthotropic materials"
    Mehdi Fakoorsaghieh, Alireza Vazirinezhad, Zahra Daneshjoo
    ARCHIVE OF APPLIED MECHANICS, Vol. 93, No 10, 2023
  14. "Investigation into effective mechanical properties of porous material produced by the additive manufacturing method"
    Seyed Mohammad Javad Tabatabaee, Mehdi Fakoorsaghieh
    Frattura ed Integrita Strutturale, Vol. 17, No 65, pp.208-223, 2023
  15. "Investigating the relative motion of two satellites corresponding to the orbital collocation strategy"
    Fateme Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    JOURNAL OF AEROSPACE SCIENCE AND TECHNOLOGY(JAST), Vol. 16, No 1, pp.101-114, 2023
  16. "Fracture study of wood considering the effect of T-stress term based on matrix reinforcement coefficients model"
    Zahra Khaji, Mehdi Fakoorsaghieh
    ARCHIVE OF APPLIED MECHANICS, Vol. 93, No 5, 2023
  17. "A comprehensive study on the influence of T-stress term on crack initiation angle in orthotropic materials based on the modification of MTS, MSS, SER and SED criteria"
    Mehdi Fakoorsaghieh, Zahra Khaji
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 124, No 103751, 2023
  18. "Appropriate fitted point on fracture limit curve of orthotropic materials to include the fracture process zone effects on mixed-mode I/II fracture criterion"
    Zahra Daneshjoo, Mehdi Fakoorsaghieh
    ACTA MECHANICA, Vol. 234, No 4, 2023
  19. "Mixed-mode I/II criterion based on combining Hill failure analysis and reinforcement isotropic solid model"
    Zare hossein abadi Shahab, Mohammad Hossein Sabour, Mehdi Fakoorsaghieh
    ACTA MECHANICA, Vol. 234, No 4, pp.1437-1450, 2023
  20. "4-degrees of freedom attitude equations of motion: A new approach for simulating flexible satellite dynamics with time-varying payload despite time delay and disturbances"
    Shayesteh Nikpay, Mehdi Fakoorsaghieh, Ahmad Kalhor
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, Vol. 237, No 1, 2023
  21. "Examining the effect of crack initiation angle on fracture behavior of orthotropic materials under mixed-mode I/II loading"
    Zahra Khaji, Mehdi Fakoorsaghieh
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 256, No 1, 2022
  22. "Applying the new experimental midpoint concept on strain energy density for fracture assessment of composite materials"
    Zahra Khaji, Mehdi Fakoorsaghieh, Hannaneh Manafi Farid, Rene Alderliesten
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 121, No 103522, 2022
  23. "Enhancing the ability of strain energy release rate criterion for fracture assessment of orthotropic materials under mixed-mode I/II loading considering the effect of crack tip damage zone"
    Zahra Khaji, Mehdi Fakoorsaghieh
    STEEL AND COMPOSITE STRUCTURES, Vol. 44, No 6, pp.803-814, 2022
  24. "Effect of Higher-Order Terms in the Thermal Transient Stress Intensity Factor for a Cracked Semi-Infinite Medium Under Thermal Shock"
    Mehdi Fakoorsaghieh, Sina Sotoudeh Shadbad
    STRENGTH OF MATERIALS, Vol. 54, No 3, 2022
  25. "Mixed-mode fracture assessment of wooden structures with cracks initiated along and across the fibers considering non-singular T-stress term"
    Mehdi Fakoorsaghieh, Sadra Shahsavar, Flippo Berto
    WOOD SCIENCE AND TECHNOLOGY, Vol. 56, No 4, pp.1261-1291, 2022
  26. "A Semi-theoretical criterion based on the combination of strain energy release rate and strain energy density concepts (STSERSED): Establishment of a new approach to predict the fracture behavior of orthotropic materials"
    Zahra Khaji, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 118, No 1, 2022
  27. "Probabilistic thermal stability of laminated composite plates with temperature-dependent properties under a stochastic thermal field"
    Hadi Parviz, Mehdi Fakoorsaghieh, Fatemeh Hosseini
    ACTA MECHANICA, Vol. 233, No 4, pp.1351-1370, 2022
  28. "Conceptual Design Process for LEO Satellite Constellations Based on System Engineering Disciplines"
    Ali Salehi, Mehdi Fakoorsaghieh, Amir Reza Kosari, Seyed Mohammad Navid Ghoreishi
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, Vol. 131, No 2, pp.599-618, 2022
  29. "Intelligent Sensor Fusion in High Precision Satellite Attitude Estimation Utilizing an Adaptive Network-Based Fuzzy Inference System"
    Mehdi Fakoorsaghieh, Hamidreza Heidari, Behzad Moshiri, Amir Reza Kosari
    JOURNAL OF AEROSPACE SCIENCE AND TECHNOLOGY(JAST), Vol. 14, No 2, 2021
  30. "The effect of T-stress on mixed mode I/II fracture of composite materials: Reinforcement isotropic solid model in combination with maximum shear stress theory"
    Mehdi Fakoorsaghieh, Sadra Shahsavar
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 229, No 111145, 2021
  31. "Mixed mode I/II fracture criterion to anticipate cracked composite materials based on a reinforced kinked crack along maximum shear stress path"
    Sadra Shahsavar, Mehdi Fakoorsaghieh, Flippo Berto
    STEEL AND COMPOSITE STRUCTURES, Vol. 39, No 6, 2021
  32. "Strain energy release rate in combination with reinforcement isotropic solid model (SERIS): A new mixed-mode I/II criterion to investigate fracture behavior of orthotropic materials"
    Zahra Khaji, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 113, No 102962, 2021
  33. "Progressive failure analysis of notched composite plate by utilizing macro mechanics approach"
    Seyed Mohammad Navid Ghoreishi, Mehdi Fakoorsaghieh, Ahmad Azizi
    Frontiers of Structural and Civil Engineering, Vol. 15, No 3, pp.623-642, 2021
  34. "Free vibration of a composite plate with spatially varying Gaussian properties under uncertain thermal field using assumed mode method"
    Hadi Parviz, Mehdi Fakoorsaghieh
    PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS, Vol. 559, No 1, 2020
  35. "Verification of reinforcement isotropic solid model in conjunction with maximum shear stress criterion to anticipate mixed mode I/II fracture of composite materials"
    Sadra Shahsavar, Mehdi Fakoorsaghieh, Fillipo Berto
    ACTA MECHANICA, Vol. 1, No 1, 2020
  36. "A micromechanical approach for mixed mode I/II failure assessment of cracked highly orthotropic materials such as wood"
    Mehdi Fakoorsaghieh, Mina Sadat Khezri
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 109, No 1, 2020
  37. "Uncertainty propagation in dynamics of composite plates: A semi-analytical non-sampling-based approach"
    Mehdi Fakoorsaghieh, Hadi Parviz
    Frontiers of Structural and Civil Engineering, Vol. 14, No 6, pp.1359-1371, 2020
  38. "On the ability of sliding mode and LQR controllers optimized with PSO in attitude control of a flexible 4-DOF satellite with time-varying payload"
    Mehdi Fakoorsaghieh, Shayesteh Nikpay, Ahmad Kalhor
    ADVANCES IN SPACE RESEARCH, Vol. 1, No 1, 2020
  39. "A Hierarchical Fuzzy-Optimal Strategy for Station-Keeping Maneuver of a GEO Satellite"
    Hossein Maghsoudi, Amir Reza Kosari, Mehdi Fakoorsaghieh, Masoud Khoshsima
    IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, Vol. 56, No 3, pp.2212-2227, 2020
  40. "Failure assessment logic model (FALM): A new approach for reliability analysis of satellite attitude control subsystem"
    Mahrad Damirchely, Mehdi Fakoorsaghieh, Hamed Yadegari
    Reliability Engineering and System Safety, Vol. 198, No 1, 2020
  41. "Optimal robust control approaches for a geostationary satellite attitude control"
    Naeimeh Najafizadeh Sari, Hadi Jahanshahi, Mehdi Fakoorsaghieh, Christos Volos, Peyman Nikpey
    International Journal of Automation and Control, Vol. 14, No 3, 2020
  42. "Investigation of Low Thrust Optimal Orbital Transfer from LEO to GEO Considering Circular Orbits"
    Mehdi Fakoorsaghieh, Sahar Sadeghi Kord Kheili, Majid Bakhtiari
    JOURNAL OF THE ASTRONAUTICAL SCIENCES, Vol. 67, No 1, pp.77-97, 2020
  43. "Mixed mode I/II fracture criterion to anticipate behavior of the orthotropic materials"
    Hannaneh Manafi Farid, Mehdi Fakoorsaghieh
    STEEL AND COMPOSITE STRUCTURES, Vol. 34, No 5, 2020
  44. "Fracture assessment of cracked composite materials: Progress in models and criteria"
    Mehdi Fakoorsaghieh, Sadra Shahsavar
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 105, No 1, 2020
  45. "Multi-objective optimization of buckling load for a laminated composite plate by coupling genetic algorithm and FEM"
    Seyed mohammad navid Ghoreishi, Mehdi Fakoorsaghieh, Mohamad Amin Jafari
    JOURNAL OF AEROSPACE SCIENCE AND TECHNOLOGY(JAST), Vol. 12, No 1, pp.27-37, 2019
  46. "Development of a physics-based theory for mixed mode I/II delamination onset in orthotropic laminates"
    Zahra Daneshjoo, Lucas Amaral, Rene Alderliesten, Mahmood M. Shokrieh, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 103, No 1, 2019
  47. "An automatic multi-objective optimization tool for the optimum design of a cracked pressure vessel with composite coating"
    Seyed Mohammad Navid Ghoreishi, Mehdi Fakoorsaghieh, Mohammad Aminjafari
    Journal of Mechanical Science and Technology, Vol. 33, No 10, pp.4867-4875, 2019
  48. "Optimal mission planning of the reconfiguration process of satellite constellations through orbital maneuvers: A novel technical framework"
    Mahshid Soleimani, Mehdi Fakoorsaghieh, Majid Bakhtiari
    ADVANCES IN SPACE RESEARCH, Vol. 63, No 10, pp.3369-3384, 2019
  49. "Adaptive Fuzzy PID Control Strategy for Spacecraft Attitude Control"
    Naeimeh Najafizadeh Sari, Hadi Jahanshahi, Mehdi Fakoorsaghieh
    International Journal of Fuzzy Systems, Vol. 21, No 3, pp.769-781, 2019
  50. "Probabilistic micromechanical damage model for mixed mode I/II fracture investigation of composite materials"
    Nabi Mehri Khansari, Mehdi Fakoorsaghieh, Filippo Berto
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 99, No 2, pp.177-193, 2019
  51. "Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading"
    Zahra Daneshjoo, Mahmood Mehrdad Shokrieh, Mehdi Fakoorsaghieh, Rene Alderliesten, Dimitrios Zarouchas
    ENGINEERING FRACTURE MECHANICS, Vol. 211, No 1, pp.82-98, 2019
  52. "Mixed mode I/II fracture criterion for arbitrary cracks in orthotropic materials considering T-stress effects"
    Hannaneh Manafi Farid, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 99, No 1, pp.147-160, 2019
  53. "Mixed-mode I/II fracture criterion for crack initiation assessment of composite materials"
    Mehdi Fakoorsaghieh, Hannaneh Manafi Farid
    ACTA MECHANICA, Vol. 230, No 1, 2019
  54. "Equivalent reinforcement isotropic model for fracture investigation of orthotropic materials"
    Mehdi Fakoorsaghieh, Roham Rafiee, Zare hossein abadi Shahab
    STEEL AND COMPOSITE STRUCTURES, Vol. 30, No 1, pp.1-12, 2019
  55. "Verification of a micro-mechanical approach for the investigation of progressive damage in composite laminates"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    ACTA MECHANICA, Vol. 230, No 1, pp.225-241, 2019
  56. "A new mixed mode I/II failure criterion for laminated composites considering fracture process zone"
    Zahra Daneshjoo, Mahmood M. Shokrieh, Mehdi Fakoorsaghieh, Rene Alderliesten
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 98, No 1, pp.48-58, 2018
  57. "Experimental and numerical investigation of progressive damage in composite laminates based on continuum damage mechanics"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    POLYMER TESTING, Vol. 70, No 1, pp.533-543, 2018
  58. "General mixed mode I/II failure criterion for composite materials based on matrix fracture properties"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 96, No 1, 2018
  59. "A New Approach in Three-Axis Satellite Stabilization Using Redundant Thruster in Elliptical Orbit"
    Mehdi Fakoorsaghieh, Alireza Sattarzadeh, Majid Bakhtiari
    International Journal of Automation and Control, Vol. 12, No 4, 2018
  60. "A New Heuristic Method for Improved Structuring of the Work Transformation Matrix (WTM)"
    Mohammad Haji Jafari, Amir Reza Kosari, Mehdi Fakoorsaghieh
    Scientia Iranica, 2018
  61. "A new macro-mechanical approach for investigation of damage zone effects on mixed mode I/II fracture of orthotropic materials"
    Mehdi Fakoorsaghieh, Maryam Shokrollahi
    ACTA MECHANICA, Vol. 229, No 8, pp.3537-3556, 2018
  62. "A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    Latin American Journal of Solids and Structures, Vol. 15, No 3, pp.1-22, 2018
  63. "Development of an optimal process for friction stir welding based on GA-RSM hybrid algorithm"
    Nabi Mehri Khansari, Seyed Mohammad Navid Ghoreishi, Mehdi Fakoorsaghieh, Filippo Berto, Namdar Karimi, Mozhgan Mokari
    Frattura ed Integrita Strutturale, Vol. 12, No 44, pp.106-122, 2018
  64. "Bi-level optimization of laminated composite structures using particle swarm optimization algorithm"
    Parviz Mohamazadeh, Mehdi Fakoorsaghieh, Mostafa Mohagheghi
    Journal of Mechanical Science and Technology, Vol. 32, No 4, pp.1643-1652, 2018
  65. "A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects"
    Zahra Daneshjoo, Mahmood M. Shokrieh, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 94, No 1, pp.46-56, 2018
  66. "Developing an optimal layout design of a satellite system by considering natural frequency and attitude control constraints"
    Mehdi Fakoorsaghieh, Parviz Mohamazadeh, Homa Momeni
    AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 71, No 1, pp.172-188, 2017
  67. "Comprehensive investigation of stress intensity factors in rotating disks containing three-dimensional semi-elliptical cracks"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 38, No 11, pp.1565-1578, 2017
  68. "Optimization of Composite Stiffened Cylindrical Shell using PSO Algorithm"
    Mehdi Fakoorsaghieh, Parviz Mohamazadeh, Elmira Jafari
    JOURNAL OF AEROSPACE SCIENCE AND TECHNOLOGY(JAST), Vol. 11, No 2, 2017
  69. "Relative hovering analysis about an elliptical perturbed orbit with consideration of dynamic air drag and oblate earth"
    Majid Bakhtiari, Kamran Daneshjou, Mehdi Fakoorsaghieh
    AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 70, No 2, 2017
  70. "Relative Tracking Control of Constellation Satellites Considering Inter-Satellite Link"
    Mehdi Fakoorsaghieh, Fateme Amozegary, Majid Bakhtiari, Kamran Daneshjou
    ADVANCES IN SPACE RESEARCH, Vol. 60, No 1, 2017
  71. "Augmented Strain Energy Release Rate (ASER): A Novel Approach for Investigation of Mixed-Mode I/II Fracture of Composite Materials"
    Mehdi Fakoorsaghieh
    ENGINEERING FRACTURE MECHANICS, Vol. 179, No 1, pp.177-189, 2017
  72. "Long-term effects of main-body’s obliquity on satellite formation perturbed by third-body gravity in elliptical and inclined orbit"
    Majid Bakhtiari, Kamran Daneshjou, Mehdi Fakoorsaghieh
    Research in Astronomy and Astrophysics, Vol. 17, No 4, 2017
  73. "The influence of fiber-crack angle on the crack tip parameters in orthotropic materials"
    Mehdi Fakoorsaghieh, Roham Rafiee, Masood Sheikhansari
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 231, No 3, pp.418-431, 2017
  74. "HYPERBOLIC HEAT CONDUCTION ANALYSIS FOR AN ORTHOTROPIC FG HOLLOW SPHERE WITH INTERNAL HEAT SOURCE. APPLICATION OF A NEW AUGMENTED STATE SPACE METHOD"
    Majid Bakhtiari, Kamran Daneshjou, Hossein Parsania, Mehdi Fakoorsaghieh
    HEAT TRANSFER RESEARCH, Vol. 48, No 15, pp.1399-1419, 2017
  75. "Spacecraft Component Adaptive Layout Environment (SCALE): an Efficient Optimization Tool"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi, Hossein Sabaghzadeh
    ADVANCES IN SPACE RESEARCH, Vol. 58, No 9, pp.1654-1670, 2016
  76. "Humanoid robot path planning with fuzzy Markov decision processes"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Mohsen Jafarzadeh
    Journal of Applied Research and Technology, Vol. 14, No 5, pp.300-310, 2016
  77. "Investigation of composite coating effectiveness on stress intensity factors of cracked composite pressure vessels"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi, Nabi Mehri Khansari
    Journal of Mechanical Science and Technology, Vol. 30, No 7, pp.3119-3126, 2016
  78. "On Equivalency between Numerical Process DSM and State-Space Representation"
    Amir Reza Kosari, Mohammad Haji Jafari, Mehdi Fakoorsaghieh
    IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT, Vol. 63, No 4, 2016
  79. "Optimal design of the satellite constellation arrangement reconfiguration process"
    Mehdi Fakoorsaghieh, Majid Bakhtiari, Mahshid Soleimani
    ADVANCES IN SPACE RESEARCH, Vol. 58, No 3, pp.372-386, 2016
  80. "A modified model for simulation of mode I delamination growth in laminated composite materials"
    Mahmood Mehrdad Shokrieh, Zahra Daneshjoo, Mehdi Fakoorsaghieh
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 82, No 1, pp.107-116, 2016
  81. "Non-Fourier heat conduction analysis of infinite 2D orthotropic FG hollow cylinders subjected to time-dependent heat source"
    Kamran Daneshjou, Majid Bakhtiari, Hossein Parsania, Mehdi Fakoorsaghieh
    APPLIED THERMAL ENGINEERING, Vol. 98, No 1, pp.582-590, 2016
  82. "Mixed mode I/II fracture criterion for orthotropic materials based on damage zone properties"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    ENGINEERING FRACTURE MECHANICS, Vol. 153, No 1, pp.407-420, 2016
  83. "The influence of production inconsistencies on the functional failure of GRP pipes"
    Roham Rafiee, Mehdi Fakoorsaghieh, Hadi Hesamsadat
    STEEL AND COMPOSITE STRUCTURES, Vol. 19, No 6, pp.1369-1379, 2015
  84. "Revision on fuzzy artificial potential field for humanoid robot path planning in unknown environment"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Mohsen Jafarzadeh
    International Journal of Advanced Mechatronic Systems, Vol. 6, No 4, pp.174-183, 2015
  85. "Layout and configuration design for a satellite with variable mass using hybrid optimization method"
    Mehdi Fakoorsaghieh, Marziye Taghinezhad
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, Vol. 230, No 2, pp.360-377, 2015
  86. "Transient thermal analysis in 2D orthotropic FG hollow cylinder with heat source"
    Kamran Daneshjou, Majid Bakhtiari, Reza Alibakhshi, Mehdi Fakoorsaghieh
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 89, No 1, pp.977-984, 2015
  87. "Wind Power Assessment and Site Matching of Wind Turbines in Lootak of Zabol"
    Kiana Rahamni, Alibakhsh Kasaeian, Mehdi Fakoorsaghieh, Amir Reza Kosari, Seyed Benyamin Alavi
    International Journal of Renewable Energy Research, Vol. 4, No 4, 2014
  88. "A new approach for investigation of damage zone properties in orthotropic materials"
    Mehdi Fakoorsaghieh, Mohammad Hossein Sabour, Nabi Mehri Khansari
    Engineering Solid Mechanics, Vol. 2, No 2, pp.283-292, 2014
  89. "Pure shear fracture study in a brittle graphite material containing a U-notch"
    Alireza Torabi, Mehdi Fakoorsaghieh, Mohammadali Darbani
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 23, No 6, pp.839-854, 2014
  90. "Aeroelastic investigation of a composite wind turbine blade"
    Roham Rafiee, Mehdi Fakoorsaghieh
    WIND AND STRUCTURES, Vol. 17, No 6, pp.671-680, 2013
  91. "Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading"
    Alireza Torabi, Mehdi Fakoorsaghieh, Ebrahim Pirhadi
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 51, No 6, pp.1287-1298, 2013
  92. "Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch"
    Alireza Torabi, Mehdi Fakoorsaghieh, Ebrahim Pirhadi
    ENGINEERING FRACTURE MECHANICS, Vol. 111, No 1, pp.77-85, 2013
  93. "Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion"
    Mehdi Fakoorsaghieh, Roham Rafiee
    STRENGTH OF MATERIALS, Vol. 45, No 3, pp.378-385, 2013
  94. "Transition Angle a Novel Concept for Predicting the Failure Mode in Orthotropic Materials"
    Mehdi Fakoorsaghieh, Roham Rafiee
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 1, No 1, 2012
  95. "A New Mixed Mode Fracture Criterion for Orthotropic Materials ( Like Wood Based on Strength Properties )"
    Ali Reza Gowhari Anaraki , Mehdi Fakoorsaghieh
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 46, 2011
  96. "Mixed Mode Fracture Criterion for Wood Based on a Reinforcement Microcrack Damage Model"
    Alireza Gowhari Anaraki , Mehdi Fakoorsaghieh
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 527, pp.7184-7191, 2010
  97. "General mixed mode I / II fracture criterion for wood considering T - stress effects"
    Alireza Gohari Anarki , Mehdi Fakoorsaghieh
    MATERIALS & DESIGN, Vol. 31, No 9, pp.4461-4469, 2010
  98. "Efficient Algorithm for Reliability Analysis of Structures under Random Vibration"
    Daneshjou Kamran , Mehdi Fakoorsaghieh
    JSME International Journal, Series A: Solid Mechanics and Material Engineering, Vol. 1, No 11, pp.1293-1304, 2007
  99. "Design of layout optimization of component satellite by considering constraints of attitude determination and control system and electromagnetic compatibility using genetic algorithm"
    Khadijeh Vakili, Mehdi Fakoorsaghieh, Parviz Mohamazadeh
    Journal of Mechanical Engineering University of Tabriz, Vol. 54, No 3, 2024
  100. "Investigating the fracture of electronic boards in space systems under random vibrations"
    Zahra Khaji, Mehdi Fakoorsaghieh, Saeed Shakhesi
    Journal of Space Science, Technology & Applications (Persian), Vol. 4, No 1, pp.10-23, 2024
  101. "The Effect of Micrometeorite's Random Impact on Satellite Lifetime with Redundant Solar Panel Approach"
    Roya Sanaie, Pouya Pouya, Seyed Mohammad Javad Tabatabaei, Mehdi Fakoorsaghieh
    Journal of Space Science, Technology & Applications (Persian), Vol. 3, No 1, pp.114-122, 2023
  102. "Improvement of the Satellite Thermal Control Subsystem Performance with Smart Radiator"
    Mehdi Fakoorsaghieh, Mohammad Hossein Ahmadi, Amir Reza Kosari, Mehran Shahriary
    Journal of Mechanical Engineering University of Tabriz, Vol. 52, No 1, 2022
  103. "Improving the Method of Satellite Station Keeping in Geostationary Orbit with Considerations of fuel Consumption Restrictions"
    Hossein Maghsoudi, Amir Reza Kosari, Mehdi Fakoorsaghieh, Masoud Khoshsima
    Journal of Space Science, Technology & Applications (Persian), Vol. 1, No 2, pp.49-65, 2022
  104. "Uncertainty approach in layout design of satellite subsystems considering natural frequency constraints"
    Mona Habibi, Mehdi Fakoorsaghieh, Hadi Parviz
    Journal of Space Science and Technology (JSST), Vol. 14, No 1, 2021
  105. "Uncertainty propagation analysis in free vibration of uncertain composite plate using stochastic finite element method"
    Mehdi Fakoorsaghieh, Hadi Parviz, Arash Abbasi
    Amirkabir Journal of Mechanical Engineering, Vol. 52, No 12, 2021
  106. "Matrix Reinforcement Coefficients Models for Fracture Investigation of Orthotropic Materials"
    Hannaneh Manafi Farid, Mehdi Fakoorsaghieh
    Mechanical Engineering modares, Vol. 19, No 11, pp.2811-2822, 2019
  107. "Optimal Layout Design of a Satellite Considering Thermal Control Subsystem Constraints"
    Iman Veisi Khaneghahi, Mehdi Fakoorsaghieh, Mehran Shahriary
    Mechanical Engineering modares, Vol. 19, No 8, 2019
  108. "Minimum risk execution plan for conceptual design process of utility helicopter: a WTM-based method"
    Mohammad Haji Jafari, Amir Reza Kosari, Mehdi Fakoorsaghieh
    space technology and Knowledge, Vol. 8, No 1, 2019
  109. "Design for reliability: optimization of critical structures using cross-entropy reliability analysis"
    [] [], Parviz Mohamazadeh, Mehdi Fakoorsaghieh
    Iranian Journal of Mechanical Engineering,, Vol. 20, No 3, pp.41-58, 2018
  110. "Analytical Investigation of Induced Stresses on Solder Joints of Electronic Boards under Random Vibration"
    Mehdi Fakoorsaghieh, Farzad Shirmohamadli
    Mechanical Engineering modares, Vol. 18, No 4, pp.563-570, 2018
  111. "Optimal Control of Satellite Proximity Hovering around Elliptical Disturbed Orbit Using Particle Swarm Optimization"
    Hakimeh Barghi Zanjani, Ahmad Kalhor, Mehdi Fakoorsaghieh
    Mechanical Engineering modares, Vol. 17, No 11, pp.172-180, 2018
  112. "Extension of Maximum Tensile Stress Criterion to Mixed Mode Fracture of Orthotropic Materials Considering T-stress"
    Shahab Zare hosseinabadi, Mehdi Fakoorsaghieh, Roham Rafiee
    Mechanical Engineering modares, Vol. 17, No 10, pp.292-300, 2017
  113. "Extraction of optimum design process for satellite solar panel based on reliability and solutions to improve it"
    Mahrad Damirchely, Sara Mirshekari, Mehdi Fakoorsaghieh
    Mechanical Engineering modares, Vol. 17, No 8, pp.241-251, 2017
  114. "New Approaches to Cover Regional Satellite System Design Using GDOP"
    Mehdi Fakoorsaghieh, Mohadese Ghorbani, Majid Bakhtiari
    Mechanical Engineering modares, Vol. 17, No 4, pp.193-200, 2017
  115. "Modeling of large scale relative motion of two satellites in elliptical orbit"
    Mehdi Fakoorsaghieh, Fateme Amozegary, Majid Bakhtiari
    Mechanical Engineering modares, Vol. 17, No 2, 2017
  116. "Simulation of Orthotropic Damaged Zone Behavior Using Viscoelastic Models"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    Amirkabir (Journal of Science and Technology), Vol. 48, No 4, pp.401-410, 2017
  117. "A novel 3- axis attitude stabilization with redundant thruster for a cube-satellite supported by reaction wheels"
    Mehdi Fakoorsaghieh, Alireza Sattarzadeh, مجید بختیاری
    Mechanical Engineering modares, Vol. 16, No 4, pp.391-402, 2016
  118. "Optimal Design of Guidance Algorithm for the Reconfiguration Phase of the Satellite Constellation"
    Mehdi Fakoorsaghieh, مجید بختیاری, Mahshid Soleimani
    Mechanical Engineering modares, Vol. 16, No 2, pp.31-40, 2016
  119. "Development of a systematic design approach for a cubic Satellite using design structure Matrix method"
    Amir Reza Kosari, Mehdi Fakoorsaghieh, Shidvash Vakilipour, Vahid Bohlouri
    space technology and Knowledge, Vol. 4, No 1, pp.33-45, 2015
  120. "Simulation of initiation and propagation of mode I delamination in laminated composites considering fracture process zone effects"
    Mahmood M. Shokrieh, Zahra Daneshjoo, Mehdi Fakoorsaghieh
    Industrial Engineering & Management Sharif, Vol. 14, No 1, 2015
  121. "Design of configuration and layout optimization in GEO satellite"
    Mehdi Fakoorsaghieh, Marziye Taghinezhad, Amir Reza Kosari
    Mechanical Engineering modares, Vol. 15, No 1, 2015
  122. "System design algorithm for mission oriented systems with reliability approach"
    Mehdi Fakoorsaghieh, Negar Motamen
    Mechanical Engineering modares, Vol. 14, No 1, 2014
  123. "Ballistic Life Expectancy of a Satellite calculated Using Numerical Methods under the Influence of Angle of Attack and Aerodynamic Torque"
    Amir Reza Kosari, Marzieh Dolatabadi, Mehdi Fakoorsaghieh, Mohammad-ali Amiri Atashgah
    space technology and Knowledge, Vol. 1, No 1, pp.1-10, 2014
  124. "A model for investigation of damaged zone mechanical properties in crack tip vicinity of orthotropic materials"
    Mohammad Hossein Sabour, Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    Mechanical Engineering modares, Vol. 1, No 1, 2014
  125. "Design of LQG/LTR controller for attitude control of Geostationary satellite using reduced quaternion model"
    Amir Reza Kosari, Mahdi Peyrovani, Mehdi Fakoorsaghieh, Hossein Nejat
    Mechanical Engineering modares, Vol. 14, No 6, pp.1-10, 2014
  126. "Two-obejective optimization of GEO communication satellite trajectory considering impulsive orbital maneuver"
    Ehsan Maani, Amir Reza Kosari, Mehdi Fakoorsaghieh
    Mechanical Engineering modares, Vol. 14, No 5, pp.121-128, 2014
  127. "Application of cross-entropy method in multi limit-state reliability analysis"
    Mehdi Fakoorsaghieh, پرویز محمدزاده, Mahdi Bajellan
    Mechanical Engineering modares, Vol. 14, No 3, pp.6-1, 2014
  128. "Design and analysis of sandwich panels as a support structure of solar cells for a GEO communications satellite"
    Mahmood Mehrdad Shokrieh, Mehdi Fakoorsaghieh, زهرا دانشجو
    Journal of Space Science and Technology (JSST), Vol. 6, No 4, pp.13-22, 2014
  129. "Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels"
    Amir Reza Kosari, Mahdi Peyrovani, Mehdi Fakoorsaghieh, Hossein Nejat Pishkenari
    Mechanical Engineering modares, Vol. 13, No 14, 2014
  130. "Design of optimal thruster configuration for attitude and position control of GEO satellite"
    Amir Reza Kosari, Samane Kaviri, Behzad Moshiri, Mehdi Fakoorsaghieh
    Mechanical Engineering modares, Vol. 13, No 13, 2014
  131. "Review of Methods for Optimal Layout of Satellite Components"
    Mehdi Fakoorsaghieh, Marzieh Taghinezhad, Amir Reza Kosari
    Mechanical Engineering modares, Vol. 13, No 9, pp.137-126, 2013
  132. "Hybrid estimation of gyro model parameters and GEO satellite moment of inertia"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Hossein Saleh Ghafari
    Journal of Space Science and Technology (JSST), Vol. 6, No 2, pp.74-67, 2013
  133. "Two-objective optimization of GEO communication satellite trajectory considering continuous orbital maneuver"
    Ehsan Maani, Amir Reza Kosari, Mehdi Fakoorsaghieh
    Mechanical Engineering modares, Vol. 13, No 7, pp.142-152, 2013

Conference Paper

  1. "Collocation of GEO-satellites using differential game theory"
    Fateme Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    32st International Conference on Electrical Engineering, 2024
  2. "Mixed-mode I/II fracture criterion for crack growth behavior of orthotropic materials"
    Zahra Daneshjoo, Mahmood Mehrdad Shokrieh, Mehdi Fakoorsaghieh, Rene Alderliesten
    The 7th International Conference on Composites: Characterization, Fabrication and Application (CCFA-7), 2020
  3. "Image Based Micromechanical Method for Simulation of Damage Zone"
    Nabi Mehri Khansari, Mozhgan Mokari, Mehdi Fakoorsaghieh
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), 2020
  4. "Extended Maximum Principal Stress Criterion for Fracture Assessment of Composite Materials"
    Mehdi Fakoorsaghieh, Hannaneh Manafi Farid
    ICCSM 2020 : 22th International Conference on Composite Structures and Materials, 2020
  5. "Extended Strain Energy Density Criterion for Fracture Investigation of Orthotropic Materials"
    Mehdi Fakoorsaghieh, Hannaneh Manafi Farid
    ICEM 2018 : 20th International Conference on Engineering Mechanics, 2018
  6. "Investigation of Mode II Fracture Toughness in Orthotropic Materials"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari, Ahmadreza Farokhi
    ICAEMS 2018 : 20th International Conference on Aeronautical Engineering and Mechanical Structure, 2018
  7. "Failure Criterion for Mixed Mode Fracture of Cracked Wood Specimens"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    19th International Conference on Engineering Mechanics, 2017
  8. "Optimal Design of Composite Patch for a Cracked Pipe by Utilizing GA and FEM"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    19th International Conference on Fracture Mechanics, Polymers, Composites and Adhesives, 2017
  9. "A Novel Analytical Solution of the Energy Absorption of Fiber Bridging Zone of Unidirectional Composites under Mixed Mode I/II Loading"
    Mahmood Mehrdad Shokrieh, Zahra Daneshjoo, Mehdi Fakoorsaghieh
    The 5th International Conference on Composites: Characterization, Fabrication and Application, 2016
  10. "Calculation of stress intensity factors in rotating disks containing 3D semi elliptical cracks"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    18th International Conference on Engineering Mechanics, 2016
  11. "Energy Based Criterion for Mixed Mode I/Ii Fracture of Composite Materials: Attending Damaged Zone"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    International Conference on Engineering & Technology, Computer, Basic and Applied Sciences, 2016
  12. "Fatigue Crack Growth Assessment of Skin-Stringer Panels having Different Crack Scenarios"
    Ghasem Sadeghi, Mohammadreza Maktoobian, Mehdi Fakoorsaghieh, Behrooz Alem
    The Biennial International Conference on Experimental Solid Mechanics, 2016
  13. "Attitude Control of a Global Navigation Satellite Using Flexible Appendages Model and Modified Linear Quadratic Gaussian Regulator"
    Amir Reza Kosari, Majid Aminafshar, Mehdi Fakoorsaghieh
    APSCO Sixth International Symposium on Global Navigation Satellite System (GNSS) Technology and its Applications, 2014
  14. "A New Method for Trajectory Optimization in Terrain Following Flight"
    Amir Reza Kosari, Hosein Maghsoudi Dehaghani, Mehdi Fakoorsaghieh, Mohammad Rahim
    22nd Iranian Conference on Electrical Engineering (ICEE 2014), 2014
  15. "Trajectory Planning and Trajectory Tracking of a Submarine Robot Based on Minimization of Detection Capability"
    Amir Reza Kosari, Hosein Maghsoudi Dehaghani, Seyed Mostafa Sabatian, Abdollah Madadkar, Mehdi Fakoorsaghieh
    22nd Iranian Conference on Electrical Engineering (ICEE 2014), 2014
  16. "Damaged Zone Behavior Investigation Using Viscoelastic Models"
    Mehdi Fakoorsaghieh, Mohammad Hossein Sabour, Nabi Mehri Khansari
    The Bi-Annual International Conference on Experimental Solid Mechanics X-Mech 2014, 2014
  17. "An Experimental Method for Investigation of Damaged Zone Size in Orthotropic Materials"
    Mehdi Fakoorsaghieh, Mohammad Hossein Sabour, Nabi Mehri Khansari
    The Bi-Annual International Conference on Experimental Solid Mechanics X-Mech 2014, 2014
  18. "Expand of System Design of Cube Satellite with Design Structure Matrix Method"
    Amir Reza Kosari, Vahid Bohlouri, Mehdi Fakoorsaghieh
    Symposium on Basic Space Technology, Small Satellite Missions for Developing Space Nations, 2013
  19. "Design structure Matrix Method as a professional tool for Complex System Analysis Applied to a Cube Satellite System Design"
    Amir Reza Kosari, Mehdi Fakoorsaghieh, Vahid Bohluri Ghaeni
    United Nations/United Arab Emirates Symposium on Basic Space Technology "Small Satellite Missions for Developing Space Nations", 2013
  20. "Design of LQG/LTR Controller for Attitude Control of Geostationary Satellite using Reaction Wheels"
    Amir Reza Kosari, Mahdi Peyrovani, Mehdi Fakoorsaghieh
    The 9th IEEE Vehicle Power and Propulsion Conference (VPPC 2013), 2013
  21. "AERODYNAMIC OF SATELLITES IN LOW EARTH ORBITS"
    Amir Reza Kosari, Marzieh Dolatabadi, Mehdi Fakoorsaghieh, Mohammad-ali Amiri Atashgah
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  22. "SYSTEMATTIC DESIGN OF A REMOTE SENSING CUBE SATELLITE USING DESING STRUCTURE MATRIX (DSM) METHOD"
    Amir Reza Kosari, Vahid Bohlouri, Mehdi Fakoorsaghieh
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  23. "Design of LQG/LTR Controller for Attitude Control of Satellite Using Thrusters and Reaction Wheels"
    Amir Reza Kosari, Mehdi Peyrovani, Mehdi Fakoorsaghieh, Hossein Nejat Pishkenari
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  24. "PASSIVE AERODYNAMIC STABILIZATION OF REMOTE SENSING SATELLITE"
    Amir Reza Kosari, Marzieh Dolatabadi, Mehdi Fakoorsaghieh, Mohammad-ali Amiri Atashgah
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  25. "COMPARISON OF DIFFERENT CONFINGURATIONS OF THRUSTERS IN DESIGN OF LQG/LTR CONTROLLER FOR ATTITUDE CONTROL OF SATELLITE"
    Amir Reza Kosari, Mehdi Peyrovani, Mehdi Fakoorsaghieh, Hossein Nejat Pishkenari
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  26. "LAYOUT DESGN WITH HYBRID OPTIMAZATION METHOD IN REMOTE SENSING SATELLITE"
    Marzieh Taghinezhad, Mehdi Fakoorsaghieh, Amir Reza Kosari
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  27. "DESIGN OF A CUBE SATELLITE WITH REMOTE SENSING APPLCATION"
    Amir Reza Kosari, Vahid Bohlouri, Mehdi Fakoorsaghieh
    APSCO 5th International Symposium on Satellite Remote Sensing, 2013
  28. "Constraint control allocation using differential evolution for over-actuated geostationary communications satellite"
    Amir Reza Kosari, Samane Kaviri, Behzad Moshiri, Mehdi Fakoorsaghieh
    21st Iranian Conference on Electrical Engineering, ICEE 2013, 2013
  29. "Nonlinear PID design to control a geostationary spacecraft under actuator saturation"
    Amir Reza Kosari, Hossein Saleh Ghafari, Mehdi Fakoorsaghieh
    First International Conference on Robotics and Mechatronics, 2013
  30. "Hybrid Estimation of Gyro Calibration Parameters and Moment of Inertia of a Geostationary Communication Satellite"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Hossein Saleh Ghafari
    APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, 2012
  31. "Design of optimal thrusters configuration for attitude control of geostationary communication satellite"
    Amir Reza Kosari, Mehdi Fakoorsaghieh, Behzad Moshiri, Samane Kaviri
    APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, 2012
  32. "Design and analysis of sandwich panels as a support structure of solar cells for a GEO communication satellite"
    Mahmoud Mehrdad Shoukrie, Mehdi Fakoorsaghieh, زهرا دانشجو
    APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, 2012
  33. "Geostationary Satellite Attitude Determination Using Data Fusion of Three Attitude Sensors"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Behzad Moshiri, Hamid Reza Heydari
    APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, 2012
  34. "A new approach for a GEO satellite layout optimization"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Marzieh Taghinezhad
    APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, 2012
  35. "Investigation of interlayer crack generation and growth in composite materials under combined mode I/II loading"
    Zahra Shirzadeh, Mehdi Fakoorsaghieh, Zahra Daneshjoo
    ISME2024, 2024
  36. "Optimum co-location of GEO satellites in the 120° east orbital Slot using differential game theory"
    Fateme Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    22nd International Conference of Iranian Aerospace Society, 2024
  37. "Investigating the equivalent mechanical properties of porous materials made by the additive manufacturing method"
    Pouya Pouya, Seyed Mohammad Javad Tabatabaei, Roya Sanaie, Mehdi Fakoorsaghieh
    AERO2024, 2024
  38. "The effect of the stress term T on the fracture behavior of orthotropic materials under mixed mode I/II loading based on the maximum SER criterion"
    Mehdi Fakoorsaghieh, Zahra Khaji
    ISME2023, 2023
  39. "Investigating the effect of satellite relative motion on inter-satellite link performance"
    Fateme Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    The 21st International Conference of Iranian Aerospace Society, 2023
  40. "Application of energy base criterion to investigate the fracture of orthotropic materials with cracks along the fibers"
    Ali Farahnak, Mehdi Fakoorsaghieh
    21st International Conference On Iranian Aerospace, 2023
  41. "Presenting a new center notched disk tension specimen to study stress intensity factors in orthotropic materials"
    Mehdi Fakoorsaghieh, Zahra Khaji
    21st International Conference On Iranian Aerospace, 2023
  42. "A new analytical model for predicting the crack initiation angle based on the maximum strain energy release rate criterion"
    Mehdi Fakoorsaghieh, Zahra Khaji
    AERO2022, 2022
  43. "A new approach for fracture assessment of orthotropic materials by considering the effects of fracture process zone"
    Mehdi Fakoorsaghieh, Zahra Khaji
    AERO2022, 2022
  44. "Development of maximum strain energy release rate criterion for orthotropic materials based on the concept of reinforced isotropic solid"
    Mehdi Fakoorsaghieh, Zahra Khaji
    AERO2022, 2022
  45. "Optimizing the geostationary satellite position to meet the collocation requirements using multi-objective PSO algorithm"
    Fatemeh Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    20 st International Conference on Iranian Arespac Society, 2022
  46. "A new mixed mode I/II fracture criterion for orthotropic materials considering the FPZ"
    Zahra Daneshjoo, Mehdi Fakoorsaghieh, سلاله سلیمی
    ISME2022, 2022
  47. "Requirements for establishing an intersatellite link between two geostationary satellites"
    Fateme Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    30th Annual International Conference ofIranian Society of Mechanical Engineers, 2022
  48. "Thermal analysis of a sample satellite considering operation of the assume element out of the defined temperature range"
    Hesam Abdi, Mehdi Fakoorsaghieh, Mehran Shahriary
    AERO2021, 2021
  49. "Investigating the relative motion of two GEO satellites based on the orbit collocation strategy"
    Fatemeh Amozegary, Amir Reza Kosari, Mehdi Fakoorsaghieh
    The 19th International Conference of Iranian Aerospace Society, 2021
  50. "Fracture investigation of of cracked orthotropic materials under mixed mode I/II loading by extension of Hashin criterion"
    Alireza Vazirinezhad, Mehdi Fakoorsaghieh
    AERO2021, 2021
  51. "Extraction of fracture criterion for orthotropic materials under mixed mode I / II loading by extension of von mises criterion"
    Ali Farahnak, Mehdi Fakoorsaghieh, Elaheh Kohestani
    IRANCOMP, 2020
  52. "Buckling modeling and analysis of notched layered composite cylindrical shells"
    Ali Farahnak, Mehdi Fakoorsaghieh
    IRANCOMP, 2020
  53. "Uncertainty approach in layout design of satellite subsystems"
    Mona Habibi, Mehdi Fakoorsaghieh, Hadi Parviz
    18th International Conference of Iranian Aerospace Society (AERO-2020), 2020
  54. "Investigating the Effect of Combining Supercapacitors with Batteries to Supply Power Consumption in SAR Satellites"
    Mehdi Fakoorsaghieh, Omid Shekoofa, Sadegh Ashoori fallah
    18th International Conference of Iranian Aerospace Society (AERO-2020), 2020
  55. "Uncertainty quantification in free vibration of composite plate by random finite element method"
    Hadi Parviz, Mehdi Fakoorsaghieh, Arash Abbasi
    ISME2019, 2019
  56. "Generalized minimum strain energy criterion for composite materials with regard to the effects of fiber reinforcements"
    Hannaneh Manafi Farid, Mehdi Fakoorsaghieh
    17th International Conference Iranian Aerospace Society, 2018
  57. "Model of matrix reinforcement with fibers for orthotropic materials"
    Hannaneh Manafi Farid, Mehdi Fakoorsaghieh
    17th International Conference Iranian Aerospace Society, 2018
  58. "Progressive damage modeling of notched glass-epoxy composite plates under tensile static loading"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi, Ahmad Azizi
    ISME2018, 2018
  59. "A new fracture criterion for cracked orthotropic parts under mixed mode I / II loading based on equivalent reinforced isotropic model"
    Mehdi Fakoorsaghieh, Roham Rafiee, Shahab Zare hosseinabadi
    ISME2017, 2017
  60. "A new analytical model for prediction of bridging laws in delamination failure of laminated composites under mixed mode I / II"
    Zahra Daneshjoo, Mahmood Mehrdad Shokrieh, Mehdi Fakoorsaghieh
    ISME2017, 2017
  61. "Multi-objective optimization of stress intensity factors in cracked pipes under mixed mode loading using genetic algorithm"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    ISME2017, 2017
  62. "Extraction of optimum design process for satellite solar panel, estimation and improvement of reliability"
    Mehdi Fakoorsaghieh, Mahrad Damirchely, Sara Mirshekari
    AERO2017, 2017
  63. "Optimized design of composite patches for cracked pipes using Genetic algorithm"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi, Farshad Gordan
    AERO2017, 2017
  64. "Satellite sub-system layout optimization design considering ACS constraints"
    Mehdi Fakoorsaghieh, Parviz Mohammadzadeh, Homa Momeni
    AERO2017, 2017
  65. "Multi-objective optimization of composite laminates considering bulking loads by Genetic algorithm"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi, Mohammad Amin Jafari
    AERO2017, 2017
  66. "Conceptual design algorithm for LEO satellite constellation using DSM approach"
    Ali Salehi, Mehdi Fakoorsaghieh, Amir Reza Kosari
    AERO2017, 2017
  67. "3- axis attitude stabilization of satellite In the case of disabled actuators in elliptical orbits"
    Mehdi Fakoorsaghieh, Alireza Sattarzadeh, مجید بختیاری
    ISME2016, 2016
  68. "Optimal Design of the Satellite Constellation Arrangement Reconfiguration Process based on Lambert's theorem"
    Mehdi Fakoorsaghieh, مجید بختیاری, Mahshid Soleimani
    ISME2016, 2016
  69. "Systematic design of vertical axis wind turbine using DSM matrix"
    Kiana Rahamni, Alibakhsh Kasaeian, Mehdi Fakoorsaghieh, Amir Reza Kosari
    The first conference ob energy audit in building and industries, 2016
  70. "Three-Axis Satellite Stabilization using Neuro-Fuzzy Controller"
    Mehdi Fakoorsaghieh, Alireza Sattarzadeh, مجید بختیاری
    15th International Conference of Iranian Aerospace Society, 2016
  71. "Assessment of Damage Tolerance in the Skin-Stringer in Vertical Tail of an Aircraft"
    Mohammadreza Maktoobian, Ghasem Sadeghi, Mehdi Fakoorsaghieh, Behrooz Alem
    AERO2016, 2016
  72. "Calculation of stress intensity factors in rotating disks containing 3-D half elliptical cracks"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    15th International Conference of Iranian Aerospace Society, 2016
  73. "Investigation of geometry and mechanical properties of composite coatings on Stress intensity factors of cracked rotating disks"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    15th International Conference of Iranian Aerospace Society, 2016
  74. "Satellite trajectory optimization with low-thrust using preliminary design method"
    Mehdi Fakoorsaghieh, مجید بختیاری, Sahar Sadeghi Kord Kheili
    15th International Conference of Iranian Aerospace Society, 2016
  75. "Improving processes of a combat drone designed to minimize the design cycle time"
    Mohammad Haji Jafari, Amir Reza Kosari, Mehdi Fakoorsaghieh
    The 15th International Conference of Iranian Aerospace society, 2016
  76. "Simulation of crack tip damage zone behavior in orthotropic materials using visco-elastic model"
    Mehdi Fakoorsaghieh, Nabi Mehri Khansari
    ISME2015, 2015
  77. "Effect of geometry and mechanical properties of composite covers on Stress intensity factors for cracked composite pressure vessels"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    AERO2015, 2015
  78. "Stress intensity factor calculation of semi-elliptical cracks in composite pressure vessels"
    Mehdi Fakoorsaghieh, Seyed Mohammad Navid Ghoreishi
    1st International conference on composite pipes, vessels and tanks, 2015
  79. "Improving the Performance of Satellite Thermal Control Subsystem with Smart Coating"
    Mehdi Fakoorsaghieh, Mohammah Hossein Ahmadi, Maryam Jalalpour, Amir Reza Kosari, Rozbeh Riazi
    ISMESTU2014, 2014
  80. "Siutable thermal layout for a LEO satellite"
    Mehdi Fakoorsaghieh, Maryam Jalalpour, Mohammah Hossein Ahmadi, Amir Reza Kosari, Rozbeh Riazi
    ISMESTU2014, 2014
  81. "A New Method for Simulation of Mode I Delimitation in DCB Composite Specimens Considering R-Curves"
    Mahmood Mehrdad Shokrieh, زهرا دانشجو, Mehdi Fakoorsaghieh
    ISME2014, 2014
  82. "Pure shear fracture prediction in a disk-shape brittle graphite material containing a U-notch"
    Alireza Torabi, Mehdi Fakoorsaghieh, Mohammadali Darbani
    AERO 2014, 2014
  83. "Reliability Based Optimization of a Cantilever Beam Based on Genetic Algorithm"
    Mehdi Fakoorsaghieh, Sepide Rezayee Jafari, Parviz Mohammadzadh
    AERO 2014, 2014
  84. "Identifying and Optimizing the Design Cycle of a Pico-Satellite Using design Structure Matrix"
    Amir Reza Kosari, Vahid Bohluri Ghaeni, Mehdi Fakoorsaghieh
    13th Conference of Iranian Aerospace Society, 2014
  85. "Modeling and Simulation of Deorbiting of a Space Debris by Electro-Magnetic Tethers"
    Yaser Zareie, Mohammad-ali Amiri Atashgah, Mehdi Fakoorsaghieh
    13'th conference of Iranian Aerospace agency, 2014
  86. "Systematic design algorithm for mission oriented systems with reliability approach"
    Mehdi Fakoorsaghieh, Negar Motamen, Amir Reza Kosari
    AERO 2014, 2014
  87. "Identification and improvement of design cycles of a cube satellite using design structure matrix method"
    Amir Reza Kosari, Vahid Bohlouri, Mehdi Fakoorsaghieh
    AERO 2014, 2014
  88. "Satellite Thermal Control Subsystem Performance Enhancement Using Multiple -Phase Material Reinforced with Nano Particles"
    Amir Reza Kosari, Hamed Ebrahimnejad Shirvani, Mehdi Fakoorsaghieh, Morteza Ghanbarpoor
    2nd National Conference of Nanotechnology from Theory to Application, 2014
  89. "Analytical investigation and design optimization of"
    پرویز محمدزاده, Mehdi Fakoorsaghieh, Hamed Porbaferani
    The 2th conferece of iranian aerospace proplution society, 2013
  90. "Design optimization of combustion chamber for liquid engine"
    پرویز محمدزاده, Mehdi Fakoorsaghieh, Hamed Porbaferani
    The 2th conferece of iranian aerospace proplution society, 2013
  91. "Application of sensor data fusion theory for Increased accuracy of GEO satellite attitude control"
    Hamid Reza Heydari, Behzad Moshiri, Mehdi Fakoorsaghieh, Amir Reza Kosari
    21 th Conference of Iranian Electrical Engineering, 2013
  92. "Atmosphere identification for modeling of transfer orbit environmental conditions"
    Amir Reza Kosari, Marzieh Dolatabadi, Mehdi Fakoorsaghieh, Mohammad-ali Amiri Atashgah
    National and joint convention on computer engineering and mechanics 2013, 2013
  93. "Theoretical and experimental analysis of brittle fracture in U-notch graphite parts under pure tension"
    Alireza Torabi, Mehdi Fakoorsaghieh, Ebrahim Pirhadi
    ISME 2013, 2013
  94. "Performance comparison of data fusion methods for attitude estimation of a GEO satellite"
    Hamid Reza Heydari, Mehdi Fakoorsaghieh, Behzad Moshiri, Amir Reza Kosari
    ISME 2013, 2013
  95. "Layout optimization of a communication satellite components considering performance constraints"
    Mehdi Fakoorsaghieh, Marzieh Taghinezhad, Amir Reza Kosari, Parviz Mohamazadeh
    ISME2013, 2013
  96. "Performance Comparison of classical and intelligent methods"
    حمیدرضا حیدری, Behzad Moshiri, Mehdi Fakoorsaghieh, Amir Reza Kosari
    11th Iranian Conference on Intelligent Systems, 2013
  97. "Design of sandwich panels as a support structure of solar cells for a GEO communication satellite"
    Mahmoud Mehrdad Shoukrie, Mehdi Fakoorsaghieh, زهرا دانشجو
    12th Conference of Iranian Aerospace Society, 2013
  98. "Layout optimization of a GEO communication satellite"
    Mehdi Fakoorsaghieh, مرضیه تقی نژاد , Amir Reza Kosari, Parviz Mohammadzade
    12th Conference of Iranian Aerospace Society, 2013
  99. "Design of optimal thruster configuration for attitude cotrol of geostationary satillite"
    Amir Reza Kosari, سمانه کویری, Behzad Moshiri, Mehdi Fakoorsaghieh
    12th Conference of Iranian Aerospace Society, 2013
  100. "Systematic design of a cube satellite using design structure matrix method"
    Amir Reza Kosari, وحید بهلوری, Mehdi Fakoorsaghieh
    12th Conference of Iranian Aerospace Society, 2013
  101. "Design of optimal thruster configuration for attitude contral of geostationary satellite"
    Amir Reza Kosari, سمانه کویری, Behzad Moshiri, Mehdi Fakoorsaghieh
    First Intrenational Conferece on Robotics and Mechatronics, 2013
  102. "Investigation of Kalman filter performance in data fusion of a GEO satellite ADCS sensors"
    Mehdi Fakoorsaghieh, Amir Reza Kosari, Hossein Saleh Ghafari
    First Conference on Satellites for Sustainable Development, 2012
  103. "Crack growth simulation in composite materials using fictitious crack model"
    Mehdi Fakoorsaghieh, نیما لاسمی
    ISME 2012, 2012
  104. "Calculation of crack tip parameters in orthotropic materials considering fiber inclination"
    Mehdi Fakoorsaghieh, Nima Lasemi
    11th conference of Iranian aerospace society, 2012
  105. "Investigation of fracture mode in orthotropic materials"
    Mehdi Fakoorsaghieh, علیرضا گوهری انارکی
    11th conference of Iranian aerospace society, 2012