مقالات علمی چاپ شده در مجلات

1. "Tensile fracture of blunt V-notches in rectangular plates additively manufactured from Acrylonitrile Butadiene Styrene with different raster angles"
   Alireza Torabi, Naghdali Choupani, Majid Reza Ayatollahi, Amin Ghanbari
   ENGINEERING FAILURE ANALYSIS, Vol. 164, No 108670, 2024
2. "A simple, fast, and robust criterion for predicting fracture load and crack growth path in notched elastoplastic plates under mixed-mode loading"
   Bahador Bahrami, Alireza Torabi, Mohammad Hasaninia
   THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 133, No 104575, 2024
3. "Determining the Cohesive Length of Rock Materials by Roughness Analysis"
   Alireza Torabi, Manoj Khandelwal, Saeed Aligholi
   GEOSCIENCES, Vol. 14, No 176, 2024
4. "Does VIMC-FMC work well on highly ductile bimetal joints? An investigation on mixed mode I/II fracture of AA1050/Cu bimetal weakened by U-notches"
   Ramin Hashemi, Alireza Torabi, Mohammad Amin Motamedi
   ENGINEERING FRACTURE MECHANICS, Vol. 306, No 110246, 2024
5. "Notch strength evaluation for highly ductile Al/Cu bi-metal fabricated by the roll-bonding technique under pure mode I and pure mode II loading conditions"
   Ramin Hashemi, Alireza Torabi, Mohammad Amin Motamedi
   THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 131, No 104435, 2024
6. "Fracture assessment of U-notched diagonally loaded square plates additively manufactured from ABS with different raster orientations"
   Majid Reza Ayatollahi, Sahel Shahbaz, Alireza Torabi
   ENGINEERING STRUCTURES, Vol. 292, No 116537, 2023
7. "Quantifying the cohesive strength of rock materials by roughness analysis using a domain based multifractal framework"
   Manoj Khandelwal, Alireza Torabi, Saeed Aligholi
   International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 170, No 105492, 2023
8. "A new strategy for predicting fracture of U-notched specimens made of Al-6061-T6 and Al-5083 using extended finite element method"
   Alireza Torabi, Bahador Bahrami, Pedram Bagheri
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 9, No 46, pp.1-13, 2023
9. "Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading"
   Sergio Cicero, Behnam Saboori, Moslem Mirzavand, Alireza Torabi
   MATERIALS, Vol. 16, No 16051757, 2023
10. "Mixed Mode Fracture Investigation of Rock Specimens Containing Sharp V-Notches"
    Alireza Torabi, Sergio Cicero, Javad Akbardoost, Ali Arabnia
    MATERIALS, Vol. 15, No 15248779, 2022
11. "Mixed mode I-III fracture resistance of stainless steel 316L weakened by V-notches with end holes"
    Alireza Torabi, Michal Petru, Majid Reza Ayatollahi, Hossein Talebi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 122, No 103574, 2022
12. "On the use of Brazilian disk specimen for measuring mixed-mode I/II translaminar fracture toughness of notched glass/epoxy composite laminates: A comprehensive study"
    Hossein Hasanvand, Mohammad Amin Motamedi, Bahador Bahrami, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 121, No 103541, 2022
13. "Determination of Translaminar Notch Fracture Toughness for Laminated Composites Using Brazilian Disk Test"
    Jose Alberto Alvarez, Sergio Cicero, Meghdad Noushak, Bahador Bahrami, Mohammad Amin Motamedi, Alireza Torabi
    Polymers, Vol. 14, No 3246, 2022
14. "Providing a virtual material for simple estimation of fracture in U-notched highly orthotropic specimens with nonlinear behavior under mixed mode I/ II loading"
    Alireza Torabi, Pedram Bagheri
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 121, No 103485, 2022
15. "Size Effect on Mode I Fracture Resistance of Polymeric Rounded-Tip V-Notched Specimens Using the Modified Point Stress Criterion"
    Alireza Torabi, Javad Akbardoost, Mahdi Jabbari
    JOURNAL OF ENGINEERING MECHANICS, Vol. 148, No 7, 2022
16. "Tensile-Tearing Fracture Analysis of U-Notched Spruce Samples"
    Alireza Torabi, Sergio Cicero, Majid Reza Ayatollahi, Behnam Saboori, Sobhan Mohammadi
    MATERIALS, Vol. 15, No 3661, 2022
17. "A two-level strategy for simplification of fracture prediction in notched orthotropic samples with nonlinear behavior"
    Alireza Torabi, Mohammad Hasaninia
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 120, No 103388, 2022
18. "Experimental Verification of the Averaged Strain Energy Density Criterion for Brittle Fracture in Blunt V-Notches under Pure Compression"
    Alireza Torabi, Seyyed Mohammad Javad Razavi, Filippo Berto, Majid Reza Ayatollahi
    STRENGTH OF MATERIALS, Vol. 54, No 1, 2022
19. "A Modified Mean Stress Criterion for Considering Size Effects on Mode I Fracture Estimation of Rounded-Tip V-Notched Polymeric Specimens"
    Sergio Cicero, Javad Akbardoost, Mahdi Jabbari, Alireza Torabi
    Polymers, Vol. 14, No 1491, 2022
20. "Translaminar notch fracture toughness expressions for composite laminates"
    Ebrahim Pirhadi, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 119, No 103332, 2022
21. "U-notch fracture in additively manufactured ABS specimens under symmetric three-point bending"
    Alireza Torabi, Michal Petru, Majid Reza Ayatollahi, Sahel Shahbaz
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 119, No 103318, 2022
22. "A new methodology inspired from the Theory of Critical Distances for determination of inherent tensile strength and fracture toughness of rock materials"
    Qianbing Zhang, Alireza Torabi, Laurent Ponson, Saeed Aligholi
    International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 152, No 105073, 2022
23. "Elastoplastic fracture analysis of thin notched AA7075-AA2024 dissimilar friction-stir-welded plates under mixed mode I/II loading"
    Moslem Mirzavand, Behnam Saboori, Alireza Torabi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. xxxx, pp.1-14, 2022
24. "Fracture testing and estimation of critical loads in a PMMA-based dental material with nonlinear behavior in the presence of notches"
    Alireza Torabi, Majid Reza Ayatollahi, Sergio Cicero, Sahel Shahbaz
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 118, No 103282, 2022
25. "Investigation of notch effects on load-bearing capacity of AA7075-AA7075 friction-stir welded joints under mixed mode I/II loading"
    Behnam Saboori, Moslem Mirzavand, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 118, No 103252, 2022
26. "Compressive fracture analysis of U-notched specimens made of porous graphite reinforced by aluminum particles"
    Kazem Hamidi, Behnam Shahbazian, Alireza Torabi
    DIAMOND AND RELATED MATERIALS, Vol. 120, No 108613, 2021
27. "A Methodology to Determine the Effective Plastic Zone Size Around Blunt V-Notches under Mixed Mode I/II Loading and Plane-Stress Conditions"
    Sergio Cicero, Mirmilad Mirsayar, Behnam Shahbazian, Alireza Torabi
    Metals, Vol. 11, No 1042, 2021
28. "Free vibration analysis of a laminated beam using dynamic stiffness matrix method considering delamination"
    Mohammad-ali Amiri Atashgah, Mahdi Fatehi Narab, Alireza Torabi, Shahrokh Shams
    THIN-WALLED STRUCTURES, Vol. 166, No 107952, 2021
29. "Extension of the Equivalent Material Concept to Compressive Loading: Combination with LEFM Criteria for Fracture Prediction of Keyhole Notched Polymeric Samples"
    Alireza Torabi, Filippo Berto, Sergio Cicero, Behnam Shahbazian, Kazem Hamidi
    Applied Sciences-Basel, Vol. 11, No 4138, pp.1-16, 2021
30. "STRAIN ENERGY DENSITY-PREDICTED BRITTLE FRACTURE OF U-NOTCHED COMPONENTS UNDER COMBINED TENSION/TEAR LOADING"
    Alireza Torabi, Seyyed Mohammad Javad Razavi, Filippo Berto, Behnam Saboori
    STRENGTH OF MATERIALS, Vol. 53, No 1, pp.1-10, 2021
31. "Critical Load Prediction in Notched E/Glass–Epoxy-Laminated Composites Using the Virtual Isotropic Material Concept Combined with the Average Strain Energy Density Criterion"
    Majid Reza Ayatollahi, Alireza Torabi, Sergio Cicero, Marcos Sanchez
    Polymers, Vol. 13, No 1057, 2021
32. "Mixed mode I/II crack propagation in stainless steel 316L sheets by large plastic deformations: Prediction of critical load by combining LEFM with fictitious material concept"
    Alireza Torabi, Majid Reza Ayatollahi, Hadi Sadeghian
    ENGINEERING FRACTURE MECHANICS, Vol. 247, No 107657, 2021
33. "Notch Fracture in Polymeric Specimens under Compressive Stresses: The Role of the Equivalent Material Concept in Estimating the Critical Stress of Polymers"
    Alireza Torabi, Sergio Cicero, Abdol Saleh Rahimi, Kazem Hamidi
    Applied Sciences-Basel, Vol. 11, No 2104, 2021
34. "Fracture Behavior of Two Biopolymers Containing Notches: Eects of Notch Tip Plasticity"
    Sergio Cicero, Alireza Torabi, Majid Reza Ayatollahi, Sahel Shahbaz
    Applied Sciences-Basel, Vol. 10, No 23, pp.1-15, 2020
35. "On the use of the Fictitious Material Concept in estimating the ultimate load of keyhole notched AA6061-T6 specimens under large tension-torsion deformations"
    Majid Reza Ayatollahi, Behnam Saboori, Saeed Mohammadi, Alireza Torabi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. xxxx, pp.1-17, 2020
36. "Semi-analytical estimation of the effective plastic zone size at U-notch neighborhood in thin sheets under mixed mode I/ II loading"
    Behnam Shahbazian, Alireza Torabi
    ENGINEERING FRACTURE MECHANICS, Vol. 239, No 107323, 2020
37. "Fracture of U- and V-notched Al6061-T6 plates: The first examination of the Fictitious Material Concept under mixed mode I/III loading"
    Ali Ghelich, Behnam Saboori, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 109, No 102766, 2020
38. "Out-of-plane ductile failure of notch: Evaluation of Equivalent Material Concept"
    Mohammad Reza Kamjoo, Behnam Saboori, Alireza Torabi
    STRUCTURAL ENGINEERING AND MECHANICS, Vol. 75, No 5, pp.559-569, 2020
39. "Experimental verification of the virtual isotropic material concept for the last-ply-failure of U-notched quasiisotropic E-glass/epoxy composite laminates under tension-shear loading"
    Ebrahim Pirhadi, Alireza Torabi
    Journal of Industrial Textiles, 2020
40. "Evaluation of the equivalent material concept in mixed mode I/III fracture estimation of V-notched Al7075-T6 plates"
    Mohammad Reza Kamjoo, Alireza Torabi, Behnam Saboori
    ENGINEERING FRACTURE MECHANICS, Vol. 237, No 107259, 2020
41. "Limit curves for brittle fracture in key-hole notches under mixed mode I/III loading based on stress-based criteria"
    Alireza Torabi, Majid Reza Ayatollahi, Faezeh Hatami
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 85, No 104089, 2020
42. "Mixed mode notch fracture toughness assessment of quasi-brittle polymeric specimens at different scales"
    Javad Akbardoost, Mahdi Jabbari, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 109, No 102682, 2020
43. "Scaling effects on notch fracture toughness of graphite specimens under mode I loading"
    Javad Akbardoost, Mahdi Jabbari, Alireza Torabi
    ENGINEERING FRACTURE MECHANICS, Vol. 235, No 107153, 2020
44. "Notch tip plastic zone determination by extending Irwin’s model"
    Behnam Shahbazian, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 108, No 102643, 2020
45. "Fracture Load Predictions in Short Glass Fiber Reinforced Polyamide 6 U-Notched Specimens Combining the Equivalent Material Concept and the Theory of Critical Distances"
    Peyman Azizi, F.T. Ibanez-Gutierrez, Alireza Torabi, Sergio Cicero
    JOURNAL OF TESTING AND EVALUATION, Vol. 48, No 2, pp.1226-1251, 2020
46. "Using the Equivalent Material Concept and the Average Strain Energy Density to Analyse the Fracture Behaviour of Structural Materials"
    Alireza Torabi, Juan Diego Fuentes, Sergio Cicero
    Applied Sciences-Basel, Vol. 10, pp.1-13, 2020
47. "Implementation of XFEM for fracture prediction of VO-notched brittle specimens"
    Javad Akbardoost, Hossein Amani, Hamid Reza Majidi, Alireza Torabi
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 81, 2020
48. "Elastic-plastic damage prediction in notched epoxy resin specimens under mixed mode I/II loading using two virtual linear elastic failure criteria"
    Alireza Torabi, Majid Reza Ayatollahi, Abdol Saleh Rahimi
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. xxxx, 2020
49. "In-situ brittle fracture analysis of sharp V-notched components using digital image correlation"
    Alireza Torabi, Majid Reza Ayatollahi, Bahador Bahrami
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 106, No 1, 2020
50. "On the use of digital image correlation method for determining the stress field at blunt V-notch neighborhood"
    Alireza Torabi, Majid Reza Ayatollahi, Bahador Bahrami
    ENGINEERING FRACTURE MECHANICS, Vol. 223, No 1, 2019
51. "Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion"
    Seyed Mohammad Navid Ghoreishi, Mohammad Reza Mohammad Aliha, Mohammad Hassan Kalantari, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, No 2, 2019
52. "ON SUITABILITY OF THE AVERAGED STRAIN ENERGY DENSITY CRITERION IN PREDICTING MIXED MODE I/II BRITTLE FRACTURE OF BLUNT V-NOTCHES WITH NEGATIVE MODE I CONTRIBUTIONS"
    Majid Reza Ayatollahi, Filippo Berto, Seyed Mohammad Javad Razavi, Alireza Torabi
    STRENGTH OF MATERIALS, Vol. 51, No 5, pp.770-785, 2019
53. "Out-of-plane shear fracture analysis of PMMA and GPPS polymers weakened by round-tip V-notches"
    Alireza Torabi, Behnam Saboori
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, No 1, 2019
54. "Failure analysis of round-tip V-notched laminated composite plates under mixed mode I/II loading"
    Ebrahim Pirhadi, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, No 3, 2019
55. "Application of digital image correlation method for determination of mixed mode stress intensity factors in sharp notches"
    Alireza Torabi, Majid Reza Ayatollahi, Bahador Bahrami
    OPTICS AND LASERS IN ENGINEERING, Vol. 124, No 1, 2019
56. "Extension of the virtual isotropic material concept to mixed mode I/II loading for predicting the last-ply-failure of U-notched glass/epoxy laminated composite specimens"
    Ebrahim Pirhadi, Alireza Torabi
    COMPOSITES PART B-ENGINEERING, Vol. 176, No 1, 2019
57. "Crack growth onset in thin aluminum sheets under mixed mode I/II loading: A new form of the Equivalent Material Concept"
    Alireza Torabi, Abdol Saleh Rahimi, Mohammad Torabi, Majid Reza Ayatollahi
    THIN-WALLED STRUCTURES, Vol. 144, No 1, 2019
58. "Elastic-plastic fracture assessment of CNT-reinforced epoxy/nanocomposite specimens weakened by U-shaped notches under mixed mode loading"
    Majid Reza Ayatollahi, Abdol Saleh Rahimi, Alireza Torabi
    COMPOSITES PART B-ENGINEERING, Vol. 176, No 1, 2019
59. "On the ability of the notch fracture mechanics in predicting the last-ply-failure of blunt V-notched laminated composite specimens: A hard problem can be easily solved by conventional methods"
    Ebrahim Pirhadi, Alireza Torabi
    ENGINEERING FRACTURE MECHANICS, Vol. 217, No 1, 2019
60. "J‐integral evaluation for V‐notched ductile plates subjected to tension"
    Alireza Torabi, Mahmood Zabihi, Hamid Reza Majidi
    Material Design & Processing Communications, Vol. 1, No 1, 2019
61. "Finite Fracture Mechanics Assessment in Moderate and Large Scale Yielding Regimes"
    Alberto Sapora, Filippo Berto, Alireza Torabi
    Metals, Vol. 9, No 5, pp.1-10, 2019
62. "Experimental determination of the notch stress intensity factor for sharp Vnotched specimens by using the digital image correlation method"
    Majid Reza Ayatollahi, Bahador Bahrami, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 103, No 2, 2019
63. "Notch failure in laminated composites under opening mode: The Virtual Isotropic Material Concept"
    Alireza Torabi, Ebrahim Pirhadi
    COMPOSITES PART B-ENGINEERING, Vol. 172, No 1, pp.61-75, 2019
64. "Mixed mode I/II crack growth investigation for bi-metal FSW aluminum alloy AA7075-T6/pure copper joints"
    Siavash Etesam, Alireza Torabi, Seyed Mohammad Navid Ghoreishi, Mohammad Hassan Kalantari, Mohammad Reza Mohammad Aliha
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 103, 2019
65. "Energy-based ductile failure predictions in cracked friction-stir welded joints"
    Alireza Torabi, Filippo Berto, Seyed Mohammad Javad Razavi, Mahmood Zabihi, Hamid Reza Majidi
    ENGINEERING FAILURE ANALYSIS, Vol. 102, No 1, pp.327-337, 2019
66. "Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis"
    Alireza Torabi, Ali Moniri, Mohammad Reza Mohammad Aliha, Hamid Reza Fattahi Amirdehi
    CONSTRUCTION AND BUILDING MATERIALS, Vol. 213, No 1, pp.483-491, 2019
67. "Experimental verification of the Fictitious Material Concept for tensile fracture in short glass fibre reinforced polyamide 6 notched specimens with variable moisture"
    Juan Diego Fuentes, F.T. Ibanez Gutierrez, Sergio Cicero, Hamid Reza Majidi, Alireza Torabi
    ENGINEERING FRACTURE MECHANICS, Vol. 212, pp.95-105, 2019
68. "Application of the equivalent material concept to the study of the ductile failure due to U-notches"
    Alireza Torabi, Fernando Javier Gomez
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, Vol. 172, pp.65-69, 2019
69. "Mixed mode I/II failure prediction of thin U-notched ductile steel plates with significant strain-hardening and large strain-to-failure: The Fictitious Material Concept"
    Mohsen Kamyab, Alireza Torabi
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 75, pp.225-236, 2019
70. "Pure mode III fracture of U-notched specimens made of PMMA and GPPS polymers: Experimental and theoretical evaluations"
    Ali Hashemi, Behnam Saboori, Alireza Torabi
    ENGINEERING FRACTURE MECHANICS, Vol. 211, pp.70-81, 2019
71. "The fictitious material concept"
    Alireza Torabi, Mohsen Kamyab
    ENGINEERING FRACTURE MECHANICS, Vol. 209, pp.17-31, 2019
72. "Mixed mode І/ІІ fracture prediction of blunt V-notched nanocomposite specimens with nonlinear behavior by means of the Equivalent Material Concept"
    Majid Reza Ayatollahi, Abdol Saleh Rahimi, Alireza Torabi
    COMPOSITES PART B-ENGINEERING, Vol. 154, pp.363-373, 2018
73. "Fracture study in notched graphite specimens subjected to mixed mode I/II loading: Application of XFEM based on the cohesive zone model"
    Majid Reza Ayatollahi, Hamid Reza Majidi, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 99, pp.60-70, 2018
74. "Brittle failure of PMMA in the presence of blunt V-notches under combined tension-tear loading: Experiments and stress-based theories"
    Behnam Saboori, Majid Reza Ayatollahi, Saber Keshavarz Mohammadian, Alireza Torabi
    POLYMER TESTING, Vol. 72, pp.94-109, 2018
75. "Notch ductile failure with significant strain‐hardening: The modified equivalent material concept"
    Alireza Torabi, Mohsen Kamyab
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 42, No 2, pp.439-453, 2018
76. "Ductile failure analysis of blunt V-notched epoxy resin plates subjected to combined tension-shear loading"
    Alireza Torabi, Majid Reza Ayatollahi, Abdol Saleh Rahimi
    POLYMER TESTING, Vol. 70, pp.57-66, 2018
77. "Predicting the fracture trajectory in U, VO, and key-hole notched specimens using an incremental approach"
    Alireza Torabi, Hossein Amani, Javad Akbardoost
    ENGINEERING FRACTURE MECHANICS, Vol. 200, pp.189-207, 2018
78. "Application of EMC‐J criterion to fracture prediction of U‐ notched polymeric specimens with nonlinear behaviour"
    Alireza Torabi, Seyyed Mohammad Javad Razavi, Hamid Reza Majidi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 42, No 1, pp.352-362, 2018
79. "Mode III notch fracture toughness assessment for various notch features"
    Alireza Torabi, Majid Reza Ayatollahi, Behnam Saboori
    Physical Mesomechanics, Vol. 21, No 4, pp.320-332, 2018
80. "Energy-based assessment of brittle fracture in VO-notched polymer specimens under combined compression-shear loading conditions"
    Alireza Torabi, Ashkan Zaheri, Majid Reza Ayatollahi, Hamid Reza Majidi
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, pp.1-16, 2018
81. "Experimental and stress-based theoretical studies on mixed mode I/III fracture of round-tip V-notched Polystyrene specimens"
    Alireza Torabi, Saber Keshavarz Mohammadian, Behnam Saboori
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 95, pp.283-305, 2018
82. "J-integral expression for mixed mode I/II ductile failure prediction of U-notched Al 6061-T6 plates under large-scale yielding regime"
    Alireza Torabi, Mohammad Esmaeil Golmakani, Hamid Reza Majidi
    ENGINEERING FRACTURE MECHANICS, Vol. 195, pp.253-266, 2018
83. "Compressive brittle fracture prediction in blunt V-notched PMMA specimens by means of the strain energy density approach"
    Alireza Torabi, Marco Colussi, Majid Reza Ayatollahi
    Physical Mesomechanics, Vol. 21, No 2, pp.104-109, 2018
84. "Fracture analysis of dissimilar Al‐Al friction stir welded joints under tensile/shear loading"
    Mohammad Reza Mohammad Aliha, Mohammad Hassan Kalantari, Alireza Torabi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 41, No 9, pp.2040-2053, 2018
85. "Finite fracture mechanics crack initiation from a circular hole"
    Pietro Cornetti, Siavash Etesam, Alireza Torabi, Alberto Sapora
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 41, No 7, pp.1627-1636, 2018
86. "Fracture study in notched ductile polymeric plates subjected to mixed mode I/II loading: Application of equivalent material concept"
    Abdol Saleh Rahimi, Alireza Torabi, Majid Reza Ayatollahi
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 70, pp.37-43, 2018
87. "On combination of the equivalent material concept and J-integral criterion for ductile failure prediction of U-notches subjected to tension"
    Alireza Torabi, Mohammad Esmaeil Golmakani, Hamid Reza Majidi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 4, No 7, pp.1476-1487, 2018
88. "Averaged strain energy density to assess mixed mode I/III fracture of U-notched GPPS samples"
    Alireza Torabi, Seyyed Mohammad Javad Razavi, Filippo Berto, Behnam Saboori
    STRUCTURAL ENGINEERING AND MECHANICS, Vol. 65, No 6, pp.699-706, 2018
89. "Estimation of Fracture Loads in AL7075-T651 Notched Specimens Using the Equivalent Material Concept Combined with the Strain Energy Density Criterion and with the Theory of Critical Distances"
    Peyman Azizi, Virginia Madrazo, Alireza Torabi, Filippo Berto, Sergio Cicero, Juan Diego Fuentes
    Metals, Vol. 87, No 8, pp.1-18, 2018
90. "Fracture study of a ductile polymer-based nanocomposite weakened by blunt V-notches under mode I loading: Application of the Equivalent Material Concept"
    Majid Reza Ayatollahi, Abdol Saleh Rahimi, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 94, pp.26-33, 2018
91. "On the use of the extended finite element and incremental methods in brittle fracture assessment of key-hole notched polystyrene specimens under mixed mode I/II loading with negative mode I contributions"
    Alireza Torabi, Hamid Reza Majidi, Majid Reza Ayatollahi
    ARCHIVE OF APPLIED MECHANICS, Vol. xxxx, pp.1-26, 2017
92. "Tensile fracture analysis of a ductile polymeric material weakened by Unotches"
    Majid Reza Ayatollahi, Abdol Saleh Rahimi, Alireza Torabi
    POLYMER TESTING, Vol. 64, pp.117-126, 2017
93. "Experimental and theoretical investigation of mixed mode I/III brittle fracture of U-notched polystyrene components"
    Behnam Saboori, Alireza Torabi
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. xxxx, pp.1-11, 2017
94. "Size effects on brittle fracture of Brazilian disk samples containing a circular hole"
    Alireza Torabi, Pietro Cornetti, Alberto Sapora, Siavash Etesam
    ENGINEERING FRACTURE MECHANICS, Vol. 186, pp.496-503, 2017
95. "Prediction of fracture loads in PMMA U‐notched specimens using the equivalent material concept and the theory of critical distances combined criterion"
    Sergio Cicero, Virginia Madrazo, Peyman Azizi, Alireza Torabi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. xxxx, 2017
96. "Averaged strain energy density criterion to predict ductile failure of U-notched Al 6061-T6 plates under mixed mode loading"
    Filippo Berto, Alberto Campagnolo, Javad Akbardoost, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 91, pp.86-93, 2017
97. "Predictions of fracture load, crack initiation angle, and trajectory for V-notched Brazilian disk specimens under mixed mode I/II loading with negative mode I contributions"
    Alireza Torabi, Majid Reza Ayatollahi, Bahador Bahrami
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 41, No 3, pp.688-699, 2017
98. "Tensile failure in blunt V-notched ductile members: A new formulation of the Equivalent Material Concept"
    Alireza Torabi
    ENGINEERING FRACTURE MECHANICS, Vol. 184, pp.1-13, 2017
99. "Tensile failure prediction of U-notched plates under moderate-scale and large-scale yielding regimes"
    Seyyed Mohammad Javad Razavi, Filippo Berto, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. xxxx, 2017
100. "LARGE-SCALE YIELDING FAILURE PREDICTION OF NOTCHED DUCTILE PLATES BY MEANS OF THE LINEAR ELASTIC NOTCH FRACTURE MECHANICS"
     Filippo Berto, Alberto Campagnolo, Alireza Torabi
     STRENGTH OF MATERIALS, Vol. 49, No 2, pp.224-233, 2017
101. "Experimental verification of two stress-based criteria for mixed mode I/III brittle fracture assessment of U-notched components"
     Alireza Torabi, Filippo Berto, Majid Reza Ayatollahi, Behnam Saboori
     ENGINEERING FRACTURE MECHANICS, Vol. 182, pp.229-244, 2017
102. "Ductile failure prediction of thin notched aluminum plates subjected to combined tension-shear loading"
     Filippo Berto, Seyyed Mohammad Javad Razavi, Alireza Torabi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. xxxx, 2017
103. "Static Strength of V-Notches With End Holes Under Combined Tension-Shear Loading: Experimental Measurement by the Disk Test and Theoretical Prediction by the Local Energy"
     Alberto Campagnolo, Filippo Berto, Alireza Torabi
     JOURNAL OF TESTING AND EVALUATION, Vol. 45, No 3, pp.732-743, 2017
104. "Mixed mode I/II crack initiation from U-notches in Al 7075-T6 thin plates by large-scale yielding regime"
     Alberto Campagnolo, Filippo Berto, Alireza Torabi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 86, No 1, pp.284-291, 2016
105. "Comprehensive notch shape factors for V-notched Brazilian disk specimens loaded under mixed mode I/II from pure opening mode to pure closing mode"
     Majid Reza Ayatollahi, Bahador Bahrami, Alireza Torabi
     ARCHIVE OF APPLIED MECHANICS, Vol. 87, No 2, pp.1-15, 2016
106. "Brittle failure of key-hole notches under mixed mode I/II loading with negative mode I contributions"
     Hamid Reza Majidi, Majid Reza Ayatollahi, Alireza Torabi
     ENGINEERING FRACTURE MECHANICS, Vol. 168, No 1, pp.51-72, 2016
107. "Large plasticity induced crack initiation from U-notches in thin aluminum sheets under mixed mode loading"
     Behrooz Mohammad Hosseini, Alireza Torabi
     Engineering Solid Mechanics, Vol. 5, No 1, pp.39-60, 2016
108. "Evaluation of the load-carrying capacity of notched ductile plates under mixed mode loading"
     Mohammad Keshavarzian, Alireza Torabi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 85, No 1, pp.375-386, 2016
109. "A successful combination of the equivalent material concept and the averaged strain energy density criterion for predicting crack initiation from blunt V-notches in ductile aluminum plates under mixed mode loading"
     Filippo Berto, Alberto Campagnolo, Alireza Torabi
     Physical Mesomechanics, Vol. 19, No 4, pp.382-391, 2016
110. "Mixed mode I/II brittle fracture in V-notched Brazilian disk specimens under negative mode I conditions"
     Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
     Physical Mesomechanics, Vol. 19, No 3, pp.332-348, 2016
111. "Tensile fracture analysis of key-hole notches by means of the strain energy density"
     Alberto Campagnolo, Alireza Torabi, Filippo Berto
     STRENGTH OF MATERIALS, Vol. 48, No 2, pp.259-269, 2016
112. "Mixed mode I/III brittle fracture in round-tip V-notches"
     Behnam Saboori, Alireza Torabi, Majid Reza Ayatollahi, Filippo Berto
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 83, pp.135-151, 2016
113. "Elastic-plastic fracture analysis of notched Al 7075-T6 plates by means of the local energy combined with the equivalent material concept"
     Alireza Torabi, Filippo Berto, Alberto Campagnolo
     Physical Mesomechanics, Vol. 19, No 2, pp.204-214, 2016
114. "Mode II Brittle Fracture Assessment of Key-Hole Notches by Means of the Local Energy"
     Filippo Berto, Alberto Campagnolo, Alireza Torabi
     JOURNAL OF TESTING AND EVALUATION, Vol. 44, No 3, pp.1261-1270, 2016
115. "Tensile crack initiation from a blunt V-notch border in ductile plates in the presence of large plasticity at the notch vicinity"
     Mohammad Keshavarzian, Alireza Torabi
     International Journal of Terraspace Science and Engineering, Vol. 8, No 1, pp.93-101, 2016
116. "Application of the equivalent material concept to ductile failure prediction of blunt V-notches encountering moderate-scale yielding"
     Mehran Alaei, Alireza Torabi
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. xxxx, 2016
117. "On the necessity of using critical distance model in mixed mode brittle fracture prediction of V-notched Brazilian disk specimens under negative mode І conditions"
     Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. xxxx, 2016
118. "Brittle fracture assessment of engineering components in the presence of notches: a review"
     Majid Reza Ayatollahi, Abdol Saleh Rahimi, Alireza Torabi
     FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 39, No 3, pp.267-291, 2015
119. "Investigation of ductile rupture in U-notched Al 6061-T6 plates under mixed mode loading"
     Alireza Torabi, Rasool Habibi
     FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 39, No 5, pp.551-565, 2015
120. "Mixed-mode ductile failure analysis of V-notched Al 7075-T6 thin sheets"
     Mehran Alaei, Alireza Torabi
     ENGINEERING FRACTURE MECHANICS, Vol. 150, No 150, pp.70-95, 2015
121. "On the Ability of the Equivalent Material Concept in Predicting Ductile Failure of U-Notches under Moderate- and Large-Scale Yielding Conditions"
     Rasool Habibi, Behrooz Mohammad Hosseini, Alireza Torabi
     Physical Mesomechanics, Vol. 18, No 4, pp.337-347, 2015
122. "Combined tension–shear fracture analysis of V-notches with end holes"
     Rozbeh Riazi, Shahab Amininejad, Alireza Torabi, Mohammad Hossein Sabour
     ACTA MECHANICA, Vol. 226, No 11, 2015
123. "Brittle fracture analysis of blunt V-notches under compression"
     Majid Reza Ayatollahi, Mostafa Firoozabadi, Alireza Torabi
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 67-68, pp.219-230, 2015
124. "Tensile fracture analysis of V-notches with end holes by means of the local energy"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     Physical Mesomechanics, Vol. 18, No 3, pp.194-202, 2015
125. "Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     MATERIALS & DESIGN, Vol. 69, No 1, pp.22-29, 2015
126. "Mode II notch fracture toughness measurement for key-hole notches by the disk test"
     Alireza Torabi, Seyyed Mostafa Abedinasab
     JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 50, No 4, pp.264-275, 2015
127. "Experimental and theoretical investigation of brittle fracture in key-hole notches under mixed mode I/II loading"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     ACTA MECHANICA, Vol. 226, No 7, pp.2313-2322, 2015
128. "Fracture assessment of VO-notches under mode II loading: Experiments and theories"
     Shahab Amininejad, Alireza Torabi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 75, No 1, pp.59-69, 2015
129. "Theoretical and experimental investigation of brittle fracture in V-notched PMMA specimens under compressive loading"
     Majid Reza Ayatollahi, Mostafa Firoozabadi, Alireza Torabi
     ENGINEERING FRACTURE MECHANICS, Vol. 135, No 1, pp.187-205, 2015
130. "Brittle fracture in key-hole notches under mixed mode loading: Experimental study and theoretical predictions"
     Alireza Torabi, Seyyed Mostafa Abedinasab
     ENGINEERING FRACTURE MECHANICS, Vol. 134, No 1, pp.35-53, 2015
131. "Fracture assessment of graphite V-notched and U-notched specimens by using the cohesive crack model"
     David A. Cendon, Manuel Elices, Alireza Torabi
     FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 38, No 5, pp.563-573, 2014
132. "Closed-form expressions of mode I apparent notch fracture toughness for key-hole notches"
     Alireza Torabi
     JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 49, No 8, pp.583-591, 2014
133. "Fracture Study on Key-Hole Notches Under Tension: Two Brittle Fracture Criteria and Notch Fracture Toughness Measurement by the Disk Test"
     Alireza Torabi, Seyyed Mostafa Abedinasab
     EXPERIMENTAL MECHANICS, Vol. ****, 2014
134. "Strain energy density to assess mode II fracture in U-notched disk-type graphite plates"
     Alireza Torabi, Filippo Berto
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 23, No 7, pp.917-930, 2014
135. "Pure shear fracture study in a brittle graphite material containing a U-notch"
     Mehdi Fakoorsaghieh, Mohammadali Darbani, Alireza Torabi
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 23, No 6, pp.839-854, 2014
136. "Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading"
     Alireza Torabi, Ebrahim Pirhadi
     EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 49, No 1, pp.1-12, 2014
137. "Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy"
     Filippo Berto, Alireza Torabi
     STRUCTURAL ENGINEERING AND MECHANICS, Vol. 50, No 6, pp.723-740, 2014
138. "Brittle fracture in V-notches with end holes"
     Alireza Torabi, Shahab Amininejad
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. ****, 2014
139. "Notch Fracture Toughness Evaluation for a Brittle Graphite Material"
     Filippo Berto, Alireza Torabi
     Materials Performance and Characterization, Vol. 3, No 3, pp.1-16, 2014
140. "Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading"
     Mehdi Fakoorsaghieh, Ebrahim Pirhadi, Alireza Torabi
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 51, No 6, pp.1287-1298, 2013
141. "Compressive brittle fracture in V-notches with end holes"
     Majid Reza Ayatollahi, Alireza Torabi
     EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 45, No 1, pp.32-40, 2013
142. "Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density"
     Alireza Torabi, Filippo Berto
     STRENGTH OF MATERIALS, Vol. 45, No 6, pp.635-647, 2013
143. "The Equivalent Material Concept: Application to failure of O-notches"
     Alireza Torabi
     Engineering Solid Mechanics, Vol. 1, No 4, pp.129-140, 2013
144. "Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch"
     Mehdi Fakoorsaghieh, Ebrahim Pirhadi, Alireza Torabi
     ENGINEERING FRACTURE MECHANICS, Vol. 111, No 1, pp.77-85, 2013
145. "Failure curves for predicting brittle fracture in V-notched structural components loaded under mixed tension/shear: An advanced engineering design package"
     Alireza Torabi
     Engineering Solid Mechanics, Vol. 1, No 3, pp.99-118, 2013
146. "Wide range brittle fracture curves for U-notched components based on UMTS model"
     Alireza Torabi
     Engineering Solid Mechanics, Vol. 1, No 2, pp.57-68, 2013
147. "Determination of permissible defect size for solid axles loaded under fully-reversed rotating bending"
     Alireza Torabi, Mohammad Reza Mohammad Aliha
     Engineering Solid Mechanics, Vol. 1, No 1, pp.27-36, 2013
148. "Fracture Assessment of U-Notched Graphite Plates Under Tension"
     Alireza Torabi
     INTERNATIONAL JOURNAL OF FRACTURE, Vol. 181, No 2, pp.285-292, 2013
149. "Sudden Fracture from U-Notches in Fine-Grained Isostatic Graphite Under Mixed Mode I/II Loading"
     Alireza Torabi
     INTERNATIONAL JOURNAL OF FRACTURE, Vol. 181, No 2, pp.309-316, 2013
150. "Ultimate Bending Strength Evaluation of U-Notched Ductile Steel Samples Under Large-Scale Yielding Conditions"
     Alireza Torabi
     INTERNATIONAL JOURNAL OF FRACTURE, Vol. 180, No 2, pp.261-268, 2013
151. "Fatigue Crack Growth in a Solid Circular Shaft Under Fully Reversed Rotating Bending"
     M Heidary Khavas , Alireza Torabi
     Journal of Failure Analysis and Prevention, Vol. 12, No 4, pp.419-426, 2012
152. "Estimation of tensile load - bearing capacity of ductile metallic materials weakened by a V - notch : The equivalent material concept"
     Alireza Torabi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 536, pp.249-255, 2012
153. "Comprehensive data for rapid calculation of notch stress intensity factors in U - notched Brazilian disc specimen under tensile - shear loading"
     Alireza Torabi, Mohamad Reza Jafarinezhad
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 541, No 15, pp.153-142, 2012
154. "Extensive data of notch shape factors for V - notched Brazilian disc specimen under mixed mode loading"
     Alireza Torabi, Morteza Taherkhanib
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, pp.8599-8609, 2011
155. "Failure assessment of notched polycrystalline graphite under tensile - shear loading"
     Majid Reza Ayatollahi , Alireza Torabi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, No 18, pp.5685-5695, 2011
156. "بررسی تجربی و تئوری چقرمگی شکست مود 2 خالص برای قطعات نرم ترکدار با کرنش - سختی بالا"
     علیرضا ترابی، مجیدرضا آیت الهی، هادی صادقیان
     نشریه مهندسی مکانیک دانشگاه امیرکبیر، نسخه xxxx، 1400
157. "شکست ترد در نمونه های پلیمری دارای شیار کلیدی شکل تحت بارگذاری مرکب فشاری- برشی"
     حمیدرضا مجیدی، علیرضا ترابی، مجیدرضا آیت الهی
     نشریه مهندسی مکانیک دانشگاه امیرکبیر، نسخه 50، شماره 5، صفحات:927-942، 1397
158. "پیش بینی مسیر رشد ترک در نمونه ی پلیمری دارای شیار V شکل تحت بارگذاری مرکب برشی- فشاری"
     بهادر بهرامی، مجیدرضا آیت الهی، علیرضا ترابی
     نشریه علمی پژوهشی علوم و فناوری کامپوزیت، نسخه 4، صفحات:337-346، 1396
159. "پیش بینی شکست صفحات گرافیتی دارای شیار کلیدی شکل با استفاده از معیار چگالی انرژی کرنشی مبتنی بر مفهوم ضریب معادل"
     حمیدرضا مجیدی، مجیدرضا آیت الهی، علیرضا ترابی
     مجله علمی پژوهشی مکانیک سازه ها و شاره ها، نسخه 7، شماره 2، صفحات:1-15، 1396
160. "بررسی مسیر گسترش ترک در شیارهای V شکل نوک گرد تحت بارگذاری مرکب I/II"
     جواد اکبردوست، سید محمدحسین مهاجرانی، علیرضا ترابی
     مهندسی مکانیک مدرس، نسخه 16، شماره 3، صفحات:161-172، 1394
161. "پیش بینی شکست شیارهای V شکل با سوراخ انتهایی تحت بارگذاری مرکب کششی - برشی با استفاده از معیار چگالی انرژی کرنشی"
     فیلیپو برتو، شهاب امینی نژاد، علیرضا ترابی
     مهندسی مکانیک مدرس، نسخه *، 1394
162. "تحلیل تجربی و تئوری شکست قطعات پلیمری شبه ترد دارای شیار V شکل با سوراخ انتهایی تحت بارگذاری مرکب کششی/ برشی"
     شهاب امینی نژاد، علیرضا ترابی
     نشریه علمی پژوهشی علوم و فناوری کامپوزیت، نسخه 2، شماره 2، 1394

مقالات علمی ارائه شده در همایش‌ها

1. "An extension of the Equivalent Material Concept applied to fracture of U-notched solids"
   Alireza Torabi, Sergio Cicero, Fernando Javier Gomez
   1st Virtual European Conference on Fracture, 2020
2. "On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior"
   Fernando Javier Gomez, Hamid Reza Majidi, Alireza Torabi, Sergio Cicero
   1st Virtual European Conference on Fracture, 2020
3. "Application of the Fictitious Material Concept and the Theory of Critical Distances in the fracture analysis of SGFR-PA6 SENB specimens containing U-notches and different moisture contents"
   Hamid Reza Majidi, Alireza Torabi, Virginia Madrazo, F.T. Ibanez-Gutierrez, Juan Diego Fuentes, Sergio Cicero
   5th Iberian Conference on Structural Integrity (IbCSI 2020), 2020
4. "NOTCH STRENGTH EVALUATION OF POLYMERIC BONE CEMENT WITH NONLINEAR BEHAVIOR"
   Sahel Shahbaz, Alireza Torabi, Majid Reza Ayatollahi
   5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 2019
5. "Study of the Validity of the Equivalent Material Concept in Prediction of Components Weakened by U-notches"
   Alireza Torabi, Sergio Cicero, Manuel Ispizua, Fernando Javier Gomez
   Congress of Espanian Fracture Group, 2019
6. "CRACK EXTENSION IN THIN AL 6061-T6 SHEETS UNDER MIXED MODE I/II LOADING"
   Abdol Saleh Rahimi, Mohammad Torabi, Alireza Torabi, Majid Reza Ayatollahi
   4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018 – ICAME2018, 2018
7. "Application of the equivalent material concept to fracture of Unotched solids under small scale yielding"
   Alireza Torabi, Javier Gomez
   22nd European Conference on Fracture-ECF22, 2018
8. "Brazilian disk tests: Circular holes and size effects"
   Pietro Cornetti, Alberto Sapora, Siavash Etesam, Alireza Torabi
   22nd European Conference on Fracture-ECF22, 2018
9. "APLICACIÓN DEL CONCEPTO MATERIAL EQUIVALENTE AL ESTUDIO DE LA ROTURA PRODUCIDA POR ENTALLAS EN U"
   Alireza Torabi, Jesus Ruiz-hervias, M.a. Martin-rengel, Javier Gomez
   35 Encuentro Del Grupo Espanol De Fractura, 2018
10. "Investigation of mixed mode fracture in cracked Brazilian disk specimen under compressive mode I loading"
    Majid Reza Ayatollahi, Alireza Torabi, Bahador Bahrami
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), 2018
11. "Fracture analysis of blunt V-notched PMMA under compressive-shear loading"
    Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), 2016
12. "بررسی شکست ترد قطعات پلیمری شیاردار، تحت بارگذاری فشار خالص"
    کاظم حمیدی، علیرضا ترابی
    بیست و هشتمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1399
13. "پیش بینی تئوری و تجربی چقرمگی شکست گذرلایه ای چندلایه های کامپوزیتی حاوی شیار U شکل، تحت بارگذاری مود بازشوندگی"
    ابراهیم پیرهادی، علیرضا ترابی
    بیست و هشتمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1399
14. "بررسی تئوری و تجربی ظرفیت باربری چندلایه های کامپوزیتی حاوی شیار U شکل، تحت بارگذاری مود II خالص"
    ابراهیم پیرهادی، علیرضا ترابی
    بیست و هشتمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1399
15. "پیش‌بینی مسیر رشد ترک شروع شده از شیار در قطعات تـرد، تحـت بارگـذاری ترکیبی I/II"
    جواد اکبردوست، علیرضا ترابی، حسین امانی
    هفدهمین کنفرانس انجمن هوافضای ایران، 1397
16. "بررسی شکست اتصالات جوش اصطکاکی اغتشاشی آلومینیوم به آلومینیوم تحت بارگذاری کششی¬- برشی"
    علیرضا ترابی، محمدحسن کلانتری
    هفدهمین کنفرانس انجمن هوافضای ایران، 1397
17. "استفاده از مفهوم ماده معادل در تعیین ظرفیت باربری صفحات آلومینیومی 6061 تضعیف شده با شیار"
    محمد کشاورزیان، علیرضا ترابی
    پانزدهمین کنفرانس بین المللی انجمن هوافضای ایران، 1394
18. "بررسی شکست در شیارهای V شکل از جنس آلومینیوم آلیاژی 7075 تحت بارگذاری مد I خالص"
    مهران علایی، علیرضا ترابی
    پانزدهمین کنفرانس بین المللی انجمن هوافضای ایران، 1394
19. "تخمین میزان باربری قطعات نرم دارای شیار U شکل با رفتار الاستیک- پلاستیک به کمک معیارهای ترد"
    رسول حبیبی، علیرضا ترابی
    پانزدهمین کنفرانس بین المللی انجمن هوافضای ایران، 1394
20. "بررسی آماری شکست دیسک ردیف دوم توربین واحدهای گازی TG20 و W251 در نیروگاه ری"
    علیرضا ترابی، هادی نیری
    هشتمین کنفرانس ملی نیروگاه های برق و نمایشگاه جانبی، 1394
21. "بررسی تجربی و تئوری شکست ترد در شیارهای کلیدی شکل تحت برش خالص"
    شهاب امینی نژاد، علیرضا ترابی، رضا امینی نژاد
    چهاردهمین کنفرانس بین المللی انجمن هوافضای ایران، 1393
22. "تعیین نسبت چقرمگی شکست شیار برای شیارهای V شکل با سوراخ انتهایی به دو روش تجربی و تئوری"
    شهاب امینی نژاد، علیرضا ترابی
    چهاردهمین کنفرانس بین المللی انجمن هوافضای ایران، 1393
23. "بررسی علت شکست پره روتور کمپرسور توربین گازی 32 مگاواتی به کمک شواهد میدانی و مطالعات میکروسکوپیک"
    علیرضا ترابی، رامین وطندوست
    هفتمین کنفرانس نیروگاه های برق و نمایشگاه جانبی، 1393
24. "بررسی علت شکست دیسک ردیف دوم توربین واحد گازی 32 مگاواتی نیروگاه ری"
    هادی نیری، علیرضا ترابی
    هفتمین کنفرانس نیروگاه های برق و نمایشگاه جانبی، 1393
25. "شکست ترد در شیارهای V شکل با سوراخ انتهایی تحت بارگذاری مد I خالص"
    علیرضا ترابی، شهاب امینی نژاد
    سیزدهمین کنفرانس انجمن هوافضای ایران، 1392
26. "بررسی شکست ناگهانی در قطعات دارای شیار کلیدی شکل"
    سیدمصطفی عابدی نسب، علیرضا ترابی
    سیزدهمین کنفرانس انجمن هوافضای ایران، 1392
27. "مطالعه شکست ترد در قطعات گرافیتی دارای شیار کلیدی شکل تحت بارگذاری مرکب I/II"
    ابراهیم پیرهادی، علیرضا ترابی
    سیزدهمین کنفرانس انجمن هوافضای ایران، 1392
28. "تحلیل تئوری و تجربی شکست ناگهانی در قطعات گرافیتی دارای شیار U شکل تحت کشش خالص"
    مهدی فکور ثقیه، ابراهیم پیرهادی، علیرضا ترابی
    بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1392