مقالات علمی چاپ شده در مجلات

1. "Novel Cardiovascular Stent Based on Hibiscus-Aestivation-Inspired Auxetic Unit Cell"
   Stefan Dimov, Vahid Nasrollahi, Ali Abouei Mehrizi, Sadegh Ghofrani
   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 277, No 1, 2024
2. "Micromixer research trend of active and passive designs"
   Majid Ebrahimi Warkiani, Ali Abouei Mehrizi, Robert Salomon, Amir Hossein Hazeri, Ali Sayyah, Sajad Razavi Bazaz
   CHEMICAL ENGINEERING SCIENCE, Vol. 293, No 1, 2024
3. "Mechanical investigation of novel biomimetic cells with hybrid porosities for orthopedic applications"
   Ali Abouei Mehrizi, Dorna Hedayat, Amir Asadi, Sahand Samimi
   Journal of Mechanics in Medicine and Biology, Vol. 23, No 6, 2023
4. "Encapsulation of Frankincense Essential Oil by Microfluidic and Bulk Approaches: A Comparative Study"
   Ali Abouei Mehrizi, Mohadeseh Hashemi, Mohammad Sadegh Nourbakhsh, Pouria Taherian
   FIBERS AND POLYMERS, Vol. 23, No 10, pp.2970-2980, 2022
5. "Machine Learning-Aided Microdroplets Breakup Characteristic Prediction in Flow-Focusing Microdevices by Incorporating Variations of Cross-Flow Tilt Angles"
   Ali Abouei Mehrizi, Mina Hoorfar, Nishat Tasnim, Seyed Sepehr Mohseni, Behnam Talebjedi, Bahram Talebjedi
   LANGMUIR, Vol. 38, No 34, pp.10465-10477, 2022
6. "Modification of hexachiral unit cell to enhance auxetic stent performance"
   Ali Abouei Mehrizi, Ali Pourkamali Anaraki, Javad Kadkhodapour, Ghasem Shadalooyi, Sadegh Ghofrani, Dorna Hedayat, Amir Asadi
   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 19, No 1, pp.1-15, 2022
7. "Advances in MEMS and Microfluidics‐Based Energy Harvesting Technologies"
   Ali Abouei Mehrizi, Zhong Lin Wang, Majid Ebrahimi Warkiani, Mohsen Asadnia, Soroush Dabiri, Sajad Razavi Bazaz, M A Parvez Mahmud
   Advanced Materials Technologies, Vol. 7, No 7, 2022
8. "Composite Microgels for Imaging-Monitored Tracking of the Delivery of Vascular Endothelial Growth Factor to Ischemic Muscles"
   Eugenia Kumacheva, Mehdi Farokhi, Azadeh Ghaee, Alireza Rajabnejadkeleshteri, Ali Abouei Mehrizi, Seyed Sepehr Mohseni, Hamideh Basiri
   BIOMACROMOLECULES, Vol. 22, No 12, pp.5162-5172, 2021
9. "Simultaneous Modeling of Young’s Modulus, Yield Stress, and Rupture Strain of Gelatin/Cellulose Acetate Microfibrous/Nanofibrous Scaffolds Using RSM"
   Tianduo Li, Sajad Razavi Bazaz, Mojtaba Kusha, Ali Abouei Mehrizi, Mahdi Navidbakhsh, Alireza Barazesh
   FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY, Vol. 9, No 1, pp.1-16, 2021
10. "Investigation of porous cells interface on elastic property of orthopedic implants: Numerical and experimental studies"
    Ali Abouei Mehrizi, Sadegh Ghofrani, Sadati Mahzad
    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 120, No 1, 2021
11. "Preparation of microfluidic-based pectin microparticles loaded carbon dots conjugated with BMP-2 embedded in gelatin-elastin-hyaluronic acid hydrogel scaffold for bone tissue engineering application"
    Ali Abouei Mehrizi, Fathollah Moztarzadeh, Mehdi Farokhi, Seyed Sepehr Mohseni, Hamideh Basiri, Alireza Rajabnejadkeleshteri
    International Journal of Biological Macromolecules, Vol. 184, No 1, pp.29-41, 2021
12. "Volume-preserving strategies to improve the mixing efficiency of serpentine micromixers"
    Majid Ebrahimi Warkiani, Dayong Jin, Ali Abouei Mehrizi, Omid Rouhi, Amir Hossein Hazeri, Sajad Razavi Bazaz
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 30, No 11, pp.1-12, 2020
13. "Obstacle‑free planar hybrid micromixer with low pressure drop"
    Sajad Razavi Bazaz, Majid Ebrahimi Warkian, Morteza Miansari, Dayong Jin, Ali Abouei Mehrizi, Steven Vasilescu, Hoseyn Amiri
    MICROFLUIDICS AND NANOFLUIDICS, Vol. 24, No 8, 2020
14. "Carbon Dots Conjugated with Vascular Endothelial Growth Factor for Protein Tracking in Angiogenic Therapy"
    Hamideh Basiri, Ali Abouei Mehrizi, Eugenia Kumacheva, Mahshid Chekini, Mehdi Farokhi, Azadeh Ghaee
    LANGMUIR, Vol. 36, No 11, pp.2893-2900, 2020
15. "Hyaluronic acid/ carboxylated Zeolitic Imidazolate Framework film with improved mechanical and antibacterial properties"
    Ali Abouei Mehrizi, Azadeh Ghaee, Atiye Sadat Abednejad, Jhamak Nourmohammadi Kouhanestani
    CARBOHYDRATE POLYMERS, Vol. 222, No 115033, 2019
16. "Hydrogels Based on Cellulose and its Derivatives: Applications, Synthesis, and Characteristics"
    Masoud Soleimani, Ali Abouei Mehrizi, Vali Kiani, Hamid Zaferani, Leila Salari Asl, Hojjatollah Nazari, Sajad Razavi Bazaz, Hossein Eyni, Sadegh Ghorbani
    POLYMER SCIENCE SERIES A, Vol. 60, No 6, 2018
17. "A hybrid micromixer with planar mixing units"
    Majid Ebrahimi Warkiani, Mohsen Asadnia, Steven Vasilescu, Sadegh Ghorbani, Ali Abouei Mehrizi, Sajad Razavi Bazaz
    RSC Advances, Vol. 8, No 58, pp.33103-33120, 2018
18. "Multi-criteria optimization of curved and baffle-embedded micromixers for bio-applications"
    Sajad Razavi Bazaz, Masoud Goharimanesh, Ali Lashkaripour, Ali Abouei Mehrizi, Mohammadreza Rasouli
    Chemical Engineering and Processing-Process Intensification, Vol. 132, No 8, 2018
19. "An adaptive neural-fuzzy approach for microfluidic droplet size prediction"
    Douglas Densmore, Ali Abouei Mehrizi, Masoud Goharimanesh, Ali Lashkaripour
    MICROELECTRONICS JOURNAL, Vol. 78, No 8, pp.73-80, 2018
20. "Size-Controlled Droplet Generation in a Microfluidic Device for Rare DNA Amplification by Optimizing its Effective Parameters"
    Sajad Razavi Bazaz, Mohammadreza Rasouli, Masoud Goharimanesh, Ali Abouei Mehrizi, Ali Lashkaripour
    Journal of Mechanics in Medicine and Biology, Vol. 18, No 1, 2018
21. "A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA"
    Ali Abouei Mehrizi, Sajad Razavi Bazaz, Mina Mollajan
    Journal of Applied Fluid Mechanics, Vol. 11, No 1, pp.21-29, 2018
22. "A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA Strands"
    Ali Abouei Mehrizi, Sajad Razavi Bazaz, Mina Mollajan
    Journal of Applied Fluid Mechanics, Vol. 11, No 1, pp.21-29, 2018
23. "Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing"
    Masoud Goharimanesh, Mohammad Reza Rasouli, Ali Abouei Mehrizi, Ali Lashkaripour
    Journal of computational applied mechanics, Vol. 46, No 2, pp.167-175, 2015
24. "Plastic deformation and compressive mechanical properties of hollow sphere aluminum foams produced by space holder technique"
    Mohammad Samadi, Ali Abouei Mehrizi, Javad Kadkhodapour, Hossein Montazerian, Siegfried Schmauder
    MATERIALS & DESIGN, Vol. 83, No 4, pp.352-362, 2015
25. "Numerical Study on Low Reynolds Mixing of T-shaped Micro-Mixers with Obstacles"
    Mohammad Reza Rasouli, Ali Abouei Mehrizi, Ali Lashkaripour
    Transport Phenomena in Nano and Micro Scales, Vol. 3, No 2, pp.68-76, 2015
26. "Electrospinning of PVA/chitosan nanocomposite nanofibers containing gelatin nanoparticles as a dual drug delivery system"
    Shahrzad Fathollahipour, Mojtaba Kusha, Ali Abouei Mehrizi, Azadeh Ghaee
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, Vol. 7, No 105, pp.2021-2030, 2015
27. "Fractional Order PID Controller for Diabetes Patients"
    Ali Lashkaripour, Masoud Goharimanesh, Ali Abouei Mehrizi
    Journal of computational applied mechanics, Vol. 46, No 1, pp.69-76, 2015
28. "Application of artificial palpation in vascular surgeries for detection of peripheral arterial stenosis"
    Siamak Najarian, Abdollah Sadjadian, Javad Kadkhodapour, Elnaz Afshari, Majid Moini, Ali Abouei Mehrizi
    JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY, Vol. 38, No 4, pp.169-178, 2014
29. "Investigating Effective Parameters in Tactile Determination of Artery included in Soft Tissue by FEM"
    Javad Dargahi, Pedram Pahlavan, Majid Moini, Siamak Najarian, Ali Abouei Mehrizi
    AUT Journal of Modeling and Simulation, Vol. 44, No 1, 2009
30. "Modeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis"
    Majid Moini, Siamak Najarian, Ali Abouei Mehrizi
    AUT Journal of electrical Engineering, Vol. 41, No 2, 2009
31. "میکروفلوییدیک بر پایه کاغذ با کاربردهای پزشکی"
    علی ابوئی مهریزی، مهدی مهری
    مهندسی مکانیک، نسخه 29، شماره 1، 1399
32. "ارزیابی مدول یانگ و ضریب پواسون ساختار متخلخل دایموند برای استفاده در ایمپلنتهای ارتوپدی به روش اجزای محدود"
    علی ابوئی مهریزی، ایمان رفعتی
    مهندسی مکانیک مدرس، نسخه 19، شماره 5، 1398
33. "سنتز و ارزیابی نانوپودرمنیزیم هیدروکسیآپاتیت و تاثیر آن در رمینرالیزاسیون ضایعات اولیهی پوسیدگی مینای دندان"
    حمیده بصیری، فرهاد بخشی، علی ابوئی مهریزی
    فصلنامه مواد و فناوریهای پیشرفته، نسخه 6، شماره 4، صفحات:1-10، 1396

مقالات علمی ارائه شده در همایش‌ها

1. "A 3D passive micromixer for synthesizing nanoparticle with bio-applications: Computational study"
   Ali Abouei Mehrizi, Amirhossein Khazaei
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
2. "Design and Simulation of an Oxygen Gradient Generator for Heart-on-a-Chip"
   Ali Abouei Mehrizi, Sogol Fathi, Mahya Mosayebzade
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
3. "Simulation of Suture Production by Microfluidic Spinning to Optimise Flow Rates and Channel Length"
   Azadeh Ghaee, Amirhossein Khazaei, Ali Abouei Mehrizi, Shahbaldin Mahravani Behbahani
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
4. "Exploring the Design and Structural Analysis of Innovative Auxetic Coronary Stent"
   Ali Abouei Mehrizi, Mohaddese Shirdel
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
5. "The effect of Micropillar Geometry on Shear Stress Gradient in Endothelium-on-a-Chip"
   Ali Abouei Mehrizi, Parsa Safaeian, Mahya Mosayebzade
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
6. "A Review of Surface Plasmon Resonance (SPR) Biosensors for the Detection of Breast Cancer Biomarkers"
   Ali Abouei Mehrizi, Faezeh Rezaei, Mahsa Aghajanpour
   1st International Congress of Biomarkers, 2023
7. "A Simulation study of β-Amyloid Aggregation in A Variable Height Capillary Microfluidic Device for Early Diagnosis of Alzheimer's Disorder"
   Ali Abouei Mehrizi, Mahsa Aghajanpour, Faezeh Rezaei
   1st International Congress of Biomarkers, 2023
8. "Comparison of the Pullout Strength of Auxetic Orthopedic Screws"
   Sadegh Ghofrani, Ali Abouei Mehrizi, Mohammad Firouzmakan
   The 30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
9. "A Comparative Study on Auxetic and Non-Auxetic Heel Pads for Plantar Heel Pains"
   Ali Abouei Mehrizi, Mohaddese Shirdel, Dorna Hedayat
   The Second International Conference on Motion Analysis (ICOMA 2021), 2021
10. "Effect of increasing porosity as drug reservoirs for local drug delivery in an auxetic stent"
    Ali Abouei Mehrizi, Sadegh Ghofrani, Mohaddese Shirdel
    2021 28th National and 6th International Iranian Conference on Biomedical Engineering (ICBME), 2021
11. "Flow rate controlling by capillary micropumps in open biomicrofluidic devices"
    Ali Abouei Mehrizi, Seyed Sepehr Mohseni, Sogol Fathi
    2020 27th National and 5th International Iranian Conference on Biomedical Engineering (ICBME), 2020
12. "Effect of hydroxyapatite fiber’s shape on mechanical properties of calcium phosphate cement"
    Ali Abouei Mehrizi, Sadegh Ghofrani
    2020 27th National and 5th International Iranian Conference on Biomedical Engineering (ICBME), 2020
13. "Optimal Design of a Biodegradable Polymeric Screw for Fractured Finger Bone"
    Ali Abouei Mehrizi, Shima Doorandish Yazdi
    24th National & 2rd International Iranian Conference on Biomedical Engineering, 2017
14. "Increasing Efficiency of Micromixing Within a Biomicrofluidic Device Using Acceleration, Deceleration Technique"
    Ali Abouei Mehrizi, Sajad Razavi Bazaz, Amirhossein Hazeri
    24th National & 2rd International Iranian Conference on Biomedical Engineering, 2017
15. "Evaluation of Nanofiber PLA Scaffolds Using Dry- and Wet-Electrospinning Methods"
    Ali Abouei Mehrizi, Sadegh Ghorbani, Sajad Razavi Bazaz, Majid Ebrahimi Warkiani, Masoud Soleimani
    24th National & 2rd International Iranian Conference on Biomedical Engineering, 2017
16. "Ionic Gelation Synthesis of Alginate Nanoparticles in a Microfluidic Microchannel with Different Flow Rates"
    Javad Mohammadnejad Arough, Laleh Mahmoodi, Sajad Razavi Bazaz, Masoud Soleimani, Massoud Saidijam, Ali Abouei Mehrizi
    25th Annual International Conference on Mechanical Engineering (ISME 2017), 2017
17. "Size-Tunable Alginate Nanoparticles Synthesis Using T-Junction Microfluidic Chip"
    Masoud Soleimani, Ali Abouei Mehrizi, Laleh Mahmoodi, Sajad Razavi Bazaz, Javad Mohammadnejad Arough
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME), 2016
18. "A Novel Microfluidic Two-Level Droplet PCR for DNA Amplification"
    Ali Abouei Mehrizi, Mina Mollajan, Sajad Razavi Bazaz
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME), 2016
19. "A Novel Microfluidic Design for Blood Plasma Separation"
    Sajad Razavi Bazaz, Ali Abouei Mehrizi, Alireza Zabihi Hesari
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME, 2016
20. "Increasing the efficiency of microfluidic micromixer with gaps and baffles using design of experiments based on Taguchi method"
    Sajad Razavi Bazaz, Seyyed Morteza Javid, Mohammad Passandidehfard, Ali Abouei Mehrizi
    The Canadian Society for Mechanical Engineering (CSME) International Congress 2016, 2016
21. "Numerical Study on Effects of Curves and Ridges on Mixing of Passive Micro-Mixers"
    Mohammad Reza Rasouli, Masoud Goharimanesh, Ali Abouei Mehrizi
    First National Congress on Microfluidics and its Application in Medicine and Engineering, 2016
22. "Effect of synthesized biomimetic nano-hydroxyapatite on remineralization of enamel lesion and prevention of dental caries"
    Hamideh Basiri, Farhad Bakhshi, Sahba Mobini, Ali Abouei Mehrizi
    Proceedings of 5th International Congress on Nanoscience & Nanotechnology (ICNN2014), 2014
23. "Design, Synthesis and Characterization of Gelatin Based Microspheres for Controlling the Release Rate of Erythromycin Antibiotic"
    Shahrzad Fathollahipour, Susan Maziarfar, Ali Abouei Mehrizi
    The 1st Middle East & The 6th Iranian Controlled Release Conference 2014, 2014
24. "Synthesis of biomimetic nanostructured apatite for dental remineralization"
    Hamideh Basiri, Farhad Bakhshi, Ali Abouei Mehrizi
    The 1st Middle East & The 6th Iranian Controlled Release Conference 2014, 2014
25. "Synthesis and Characterization of Erythromycin Loaded PVA-Corn Starch Hydrogel Wound Dressing"
    Susan Maziarfar, Ali Abouei Mehrizi, Javad Tavakoli, Shahrzad Fathollahipour
    The 1st Middle East & The 6th Iranian Controlled Release Conference 2014, 2014
26. "بررسی حرکت سیال در میکروفلوییدیک بر پایه کاغذ همراه با طراحی آزمایش‌های مختلف و تغییر در ساختار کاغذ"
    علی ابوئی مهریزی، محمد آجودانیان، مهدی مهری
    بیست و هفتمین کنفرانس ملی و پنجمین کنفرانس بین المللی مهندسی زیست پزشکی ایران، 1399
27. "طراحی، ساخت و ارزیابی ایمپلنت متخلخل گرادیانی با مدول الاستیسیته نزدیک به بافت استخوان"
    علی ابوئی مهریزی، امیرحسین ایلدرم
    اولین همایش ملی مکانیک محاسباتی و تجربی، 1397
28. "کنترل مدول الاستیک سلول واحد مکعبی برای کاربرد های پزشکی بر پایه تغییر میزان تخلخل"
    امیر اسدی، علی ابوئی مهریزی، سهند صمیمی
    اولین همایش ملی مکانیک محاسباتی و تجربی، 1397
29. "بررسی محاسباتی و آزمایشگاهی ساختار متخلخل گرادیانی بر پایه سلول کلوین برای کاربردهای ارتوپدی"
    علی ابوئی مهریزی، مهزاد ساداتی
    یست و پنجمین کنفرانس ملی و سومین کنفرانس بین المللی مهندسی‌ زیست پزشکی ایران، 1397
30. "بهینه سازی سلول متخلخل کلوین برای نزدیک شدن مدول الاستیک آن به خواص الاستیک استخوان متراکم انسان"
    علی ابوئی مهریزی، جواد کدخداپور، ایمان رفعتی، مهزاد ساداتی
    یست و سومین کنفرانس مهندسی‌ زیست پزشکی ایران و اولین کنفرانس بین الملی مهندسی زیست پزشکی ایران، 1395
31. "بهینه‌سازی هندسی میکرومیکسر متداول غیرفعال شیاردار به روش تاگوچی"
    سید محسن وزیری، علی ابوئی مهریزی
    اولین همایش میکرو فلوییدیک و کاربردهای آن در پزشکی و مهندسی، 1394
32. "شبیه¬سازی تولید قطره با استفاده از روش تمرکز جریانی برای استفاده درمیکرو PCR قطره¬ای بر روی تراشه"
    مینا ملاجان، علی ابوئی مهریزی
    اولین همایش میکرو فلوییدیک و کاربردهای آن در پزشکی و مهندسی، 1394
33. "مدلسازی فرآیند تخریب وسایل ارتوپدی پلیمری زیست¬تخریب¬پذیر"
    علی ابوئی مهریزی، شیما دوراندیش یزدی
    دومین کنفرانس ملی توسعه علوم مهندسی، 1394
34. "سنتز هیدروکسی آپاتیت غیراستوکیومتری با ساختار نانو به منظور ترمیم و پیشگیری از پوسیدگی دندان"
    حمیده بصیری، علی ابوئی مهریزی، فرهاد بخشی
    کنگره ی کشوری کاربرد فناوری نانو در علوم پزشکی، 1393