Journal Paper

1. "Analysis of Temperature Effect on the Mechanical Behavior of Euler–Bernoulli Nanocantilever Using Molecular Dynamics Simulation Method"
   Reyhaneh Ahmadi, Mohammad Tahmasebipour
   NANO, Vol. 18, No 13, 2023
2. "Fabrication of peristaltic electromagnetic micropumps using the SLA 3D printing method from a novel magnetic nano-composite material"
   Mohammad Dehghan, Mohammad Tahmasebipour
   SENSORS AND ACTUATORS A-PHYSICAL, Vol. 358, No 1, 2023
3. "A novel electromagnetic micropump with PDMS membrane supported by a stainless-steel microstructure"
   Mohammad Dehghan, Mohammad Tahmasebipour
   JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 33, No 7, 2023
4. "A novel electromagnetic microactuator with a stainless steel mas-spring structure"
   Mohammad Tahmasebipour, Mohammad Dehghan
   JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 32, No 12, 2022
5. "Investigation of the effect of ultrasonic micro-welding process parameters on the microstructure components bonding"
   Mehrzad Modarres, Mohammad Tahmasebipour
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 44, No 8, 2022
6. "Numerical Study of a Centrifugal Platform for the Inertial Separation of Circulating Tumor Cells Using Contraction-Expansion Array Microchannels"
   Shadi Ebrahimi, Mohammad Tahmasebipour
   ARCHIVES OF RAZI INSTITUTE, Vol. 77, No 2, 2022
7. "Micro Electropolishing of the MEMS Metallic Structures Fabricated by the Micro WEDM Process"
   Mohammad Tahmasebipour, Younes Tahmasebipour, Mahya Boujari Aliabadi, Shadi Ebrahimi
   International Journal Of Advanced Design And Manufacturing Technology, Vol. 15, No 1, 2022
8. "Design, fabrication, and characterization of an SLA 3D printed nanocomposite electromagnetic microactuator"
   Mohammad Dehghan, Mohammad Tahmasebipour, Shadi Ebrahimi
   MICROELECTRONIC ENGINEERING, Vol. 254, No 4, 2022
9. "A Linear Inchworm Piezomotor with a New Configuration: Design Considerations, Fabrication and Characterization"
   Mohammad Sangchap, Mohammad Tahmasebipour, Younes Tahmasebipour
   Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. 45, No 1, 2020
10. "A Novel Single Axis Capacitive MEMS Accelerometer with Double-Sided Suspension Beams Fabricated using Micro-WEDM"
    Mohammad Tahmasebipour, Ali Vafaei
    SENSORS AND ACTUATORS A-PHYSICAL, Vol. 303, No 3, 2020
11. "A novel high performance integrated two-axis inchworm piezoelectric motor"
    Mohammad Tahmasebipour, Mohammad Sangchap
    Smart Materials and Structures, Vol. 29, No 2, 2019
12. "A novel capacitive micro-accelerometer made of steel using micro wire electrical discharge machining method"
    Ali Vafaei, Mohammad Tahmasebipour, Younes Tahmasebipour
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 29, No 12, 2019
13. "An electromagnetic micro-actuator with PDMS-Fe3O4 nanocomposite magnetic membrane"
    Ali Asghar Paknahad, Mohammad Tahmasebipour
    MICROELECTRONIC ENGINEERING, Vol. 216, No 1, 2019
14. "Unidirectional and bidirectional valveless electromagnetic micropump with PDMS-Fe3O4 nanocomposite magnetic membrane"
    Mohammad Tahmasebipour, Ali Asghar Paknahad
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 29, No 7, 2019
15. "Micro Wire Electrical Discharge Machining of the MEMS Structures with Optimized Dimensional Deviation"
    Mohammad Tahmasebipour, Younes Tahmasebipour, Ali Vafaei
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 12, No 2, 2019
16. "CAPILLARY DRIVEN TWO-PHASE FLOW DYNAMICS IN NONPATTERNED AND PATTERNED MICROCHANNELS"
    Mohammad Tahmasebipour, Ali Vafaei
    International Journal of Automotive And Mechanical Engineering, Vol. 16, No 1, 2019
17. "CAPILLARY DRIVEN TWO PHASE FLOW DYNAMICS IN NONPATTERNED AND PATTERNED MICROCHANNELS"
    Ali Vafaei, Mohammad Tahmasebipour
    International Journal of Automotive And Mechanical Engineering, Vol. 16, No 1, 2019
18. "Simulation of a Highly Sensitive Piezoresistive Differential Pressure Microsensor"
    Mohammad Tahmasebipour, Mehrzad Modarres
    Iranian Journal of Electrical and Electronic Engineering, Vol. 14, No 4, 2018
19. "A Highly Sensitive Three Axis Piezoelectric Microaccelerometer for High Bandwidth Applications"
    Mohammad Tahmasebipour, Ali Vafaei
    Micro and nanosystems, Vol. 9, No 2, pp.111-120, 2017
20. "Effect of Micro Wire-EDM Process Parameters on Recast Layer in the Molybdenum Micromachining"
    Mohammad Tahmasebipour, Younes Tahmasebipour, Ali Akbar Shabani, Mahya Boujari
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 10, No 1, 2017
21. "Effect of AFM Cantilever Geometry on the DPL Nanomachining Process"
    AHMAD REZA NOROUZI, Mohammad Tahmasebipour
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 9, No 4, 2016
22. "Finite Element Modeling of Timoshenko Micro-beam Based MEMS Sensor Behavior against Variation in Poisson’s Ratio"
    Hossein Salarpour, Mohammad Tahmasebipour
    British Journal of Applied Science & Technology, Vol. 17, No 5, pp.1-6, 2016
23. "Molecular Dynamic Simulation of Graphene-Poly Methyl Methacrylate Nano-Composite"
    Hadi Khezerlou, Mohammad Tahmasebipour
    Journal of Nanoelectronics and Optoelectronics, Vol. 9, No 6, 2014
24. "Finite-Volume Heat Transfer Model of the Nano Electrical Discharge Machining Process"
    Younes Tahmasebipour, Majid Ghoreishi, Mohammad Tahmasebipour
    Journal of Nanoelectronics and Optoelectronics, Vol. 9, No 6, 2014
25. "Poly Methyl Methacrylate (PMMA) Behavior Analysis Using Molecular Dynamics Simulation Method"
    Hadi Khezerlou, Mohammad Tahmasebipour
    Journal of Nanoelectronics and Optoelectronics, Vol. 9, No 6, 2014
26. "Molecular Dynamic Simulation of the Graphene Nano-Plates"
    Mohammad Tahmasebipour, Hadi Khezerlou
    Journal of Nanoelectronics and Optoelectronics, Vol. 9, No 6, 2014
27. "Optimization of Nano Calcium Carbonate Production Process Using Taguchi Method"
    Mohammad Tahmasebipour, Masoud Mirzaee Moghadam
    IJMMM: International Journal of Materials, Mechanics and Manufacturing, Vol. 2, No 1, pp.77-80, 2014
28. "Thermal Model of the Electro-Spark Nanomachining Process"
    Younes Tahmasebipour, Majid Ghoreishi, Mohammad Tahmasebipour
    IJMMM: International Journal of Materials, Mechanics and Manufacturing, Vol. 2, No 1, pp.56-59, 2014
29. "COMPUTATIONAL FLUID DYNAMIC SIMULATION OF THE NANOELECTRICAL DISCHARGE MACHINING PROCESS"
    Mohammad Tahmasebipour, Yunes Tahmasebipour , Majid Ghoreishi
    NANO, Vol. 6, No 6, pp.561-568, 2011
30. "Optimization of Electrochemical Etching Parameters in FIM/STM Tungsten Nanotip Fabrication"
    Mohammad Tahmasebipour, Vahid Ahmadi, Amir Abdullah
    Journal of Sciences, Islamic Republic of Iran, Vol. 21, No 1, pp.75-83, 2010
31. "Optimization of STM/FIM nanotip aspect ratio based on the Taguchi method"
    Mohammad Tahmasebipour, Yousef Hojjat, Vahid Ahmadi, Amir Abdullah
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 44, pp.80-90, 2009
32. "FABRICATION OF STM TUNGSTEN NANOTIP BY ELECTROCHEMICAL ETCHING METHOD"
    Mohammad Tahmasebipour, Vahid Ahmadi, Amir Abdullah, Yousef Hojjat
    International Journal of Nanoscience, Vol. 03, No 8, pp.305-310, 2009
33. "Effect of fabrication process parameters on the apex-radius of STM tungsten nanotip"
    Mohammad Tahmasebipour, Yousef Hojjat, Vahid Ahmadi, Amir Abdullah
    SCANNING, Vol. 31, No 2, pp.65-74, 2009
34. "Evaluating the Chemicals to Reduce Evaporation in Laboratory Levels on Water Quality (a Case Study of Semi-Arid Mountainous Areas)"
    صدیقه ابراهیمیان, ناصر طهماسبی پور , Mohsen Aadeli, Hossein Zeinivand, Mohammad Tahmasebipour
    Iranian Journal of Watershed Management Science and Engineering, Vol. 17, No 63, 2023
35. "Analysis of Thermo-Mechanical Behavior of Gold Nanowire by Using Molecular Dynamics Method"
    Mohammad Tahmasebipour, Reyhaneh Ahmadi, Mehrzad Modarres
    Quarterly new processes in materials engineering, Vol. 13, No 1, 2019
36. "Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever"
    Ali Attar Lamraski, Mohammad Tahmasebipour, Mohammad Dehghan
    Journal of solid and fluid mechanis, Vol. 8, No 4, 2019
37. "Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity"
    Shabnam Ghaderi, Mohammad Tahmasebipour, Ebrahim Abbaspour Sani, Mehrzad Modarres
    Journal of solid and fluid mechanis, Vol. 8, No 2, 2018
38. "Simulation and Analysis of Mechanical Behavior of Piezoresistive Pressure Microsensor"
    Mohammad Tahmasebipour, Mehrzad Modarres, Mojtaba Toufan
    mechanical engineering, Vol. 25, No 111, 2017

Conference Paper

1. "Design and simulation of a surface acoustic wave based micro pressure sensor"
   Sohrab Ghasemi Bisheh, Mohammad Tahmasebipour, Fatemeh Anousheh
   e 31st International Conference on Electrical Engineering (ICEE 2023), 2023
2. "Rapid Fabrication of Self-ordered Porous Alumina via Aluminum Anodization in Sulfuric-Phosphoric Acid Mixture Electrolyte"
   Mohammad Tahmasebipour, Elnaz Talebi
   8th International Conference on Nanostructures (ICNS8), 2020
3. "Rapid Fabrication of Self-ordered Porous Alumina via Aluminum Anodization in Sulfuric-Phosphoric Acid Mixture Electrolyte"
   Mohammad Tahmasebipour, Elnaz Talebi
   8th International Conference on Nanostructures (ICNS8), 2020
4. "Simulation of the Tensile Behavior of the Gold Nano-Disc Using Molecular Dynamics Method"
   Mohammad Tahmasebipour, Mehrzad Modarres
   1st National Conference on Micro/Nanoscale Technologies, 2018
5. "Investigation of Natural Frequency of Epoxy Micro-cantilevers via Finite Element Method and couple stress, classical, and strain gradient elasticity theories"
   Mohammad Tahmasebipour, Mehrzad Modarres, Hossein Salarpoor
   5th International Conference on Electrical and Computer Engineering, 2018
6. "Size Effect on the Deflection and Resonant Frequency of the Timoshenko Microbeam"
   Mohammad Tahmasebipour, Mehrzad Modarres, Hossein Salarpoor
   5th International Conference on Electrical and Computer Engineering, 2018
7. "Comparison of the Finite Element Method with couple stress, classical, and strain gradient elasticity theories in Analysis of Euler-Bernoulli Micro-cantilever Deflection"
   Mohammad Tahmasebipour, Mehrzad Modarres, Hossein Salarpoor
   5th International Conference on Electrical and Computer Engineering, 2018
8. "Simulation of a High Sensitive Piezoresistive Force Microsensor"
   Mehrzad Modarres, Mohammad Tahmasebipour
   International Conference on Fundamental Research in Electrical Engineering, 2017
9. "Low Actuation Voltage RF MEMS Shunt Capacitive Switch Based on Rotated Serpentine Spring"
   Hassan Saffari, Reza Askari Moghadam, Mohammad Tahmasebipour
   25th Iranian Conference on Electrical Engineering, 2017
10. "A Novel DC Contact RF MEMS Switch with High Actuation Area and Low Actuation Voltage"
    Hassan Saffari, Reza Askari Moghadam, Mohammad Tahmasebipour
    The 25th Annual International Conference on Mechanical Engineering, 2017
11. "A Survey on Low Actuation Voltage RF MEMS Switches"
    Hassan Saffari, Reza Askari Moghadam, Mohammad Tahmasebipour, Javad Koohsorkhi
    The 16th International Conference of Iranian Aerospace Society, 2017
12. "A Fixed Central Bridge RF MEMS Switch for Multiband Applications"
    Hassan Saffari, Reza Askari Moghadam, Mohammad Tahmasebipour, Javad Koohsorkhi
    The 16th International Conference of Iranian Aerospace Society, 2017
13. "Evaluation of CO2 gas sensor of silicon/ polyallylamine based microcantilever"
    Hossein Salarpour, Mohammad Tahmasebipour, Roghayeh Ghasempour
    Seminar on Sensor Science & Technology 2015, 2015
14. "Modeling of silicon/ polyallylamine micro cantilever as CO2 gas sensor"
    Hossein Salarpour, Mohammad Tahmasebipour, Roghayeh Ghasempour
    Seminar on Sensor Science and Technology 2015, 2015
15. "Analysis of Dynamic Behavior of the Epoxy Microcantilever"
    Hossein Salarpour, Mohammad Tahmasebipour
    INTERNATIONAL ORGANIC ELECTRONIC MATERIAL TECHNOLOGIES CONFERENCE, 2015
16. "Simulation of the STM nanotip fabrication Process"
    Mohammad Tahmasebipour, Reza Khanzadeh, Hadi Khezerlou
    INTERNATIONAL ORGANIC ELECTRONIC MATERIAL TECHNOLOGIES CONFERENCE, 2015
17. "Static Analysis of Euler-Bernoulli Microcantilever using the Finite Element Method"
    Hossein Salarpour, Mohammad Tahmasebipour
    INTERNATIONAL ORGANIC ELECTRONIC MATERIAL TECHNOLOGIES CONFERENCE, 2015
18. "Prediction of the Silver Nanotip Apex Radius using Molecular Dynamics Method"
    Mohammad Tahmasebipour, Reza Khanzadeh, Hadi Khezerlou
    INTERNATIONAL ORGANIC ELECTRONIC MATERIAL TECHNOLOGIES CONFERENCE, 2015
19. "Modeling of the Carbon Dioxide Micro-Sensor"
    Hossein Salarpour, Mohammad Tahmasebipour
    INTERNATIONAL ORGANIC ELECTRONIC MATERIAL TECHNOLOGIES CONFERENCE, 2015
20. "Molecular Dynamic Simulation of Graphene-PMMA Nano-Composite"
    Hadi Khezerlou, Mohammad Tahmasebipour
    International Conference on Nanoscience and Nanotechnolgy for Next Generation, 2014
21. "Analysis of the PMMA Molecule Behavior by the Molecular Dynamic Simulation"
    Hadi Khezerlou, Mohammad Tahmasebipour
    International Conference on Nanoscience and Nanotechnolgy for Next Generation, 2014
22. "Simulation of Au Nanowire Behavior under Tensile loading"
    Mohammad Tahmasebipour, Mohammad Jafari
    International Conference on Nanoscience and Nanotechnolgy for Next Generation, 2014
23. "Effect of Temperature on the Mechanical Properties of a Gold Nano-disc"
    Mohammad Tahmasebipour, Mohammad Jafari
    International Conference on Nanoscience and Nanotechnolgy for Next Generation, 2014
24. "Molecular Dynamic Simulation of the Graphene Nano-plates"
    Mohammad Tahmasebipour, Hadi Khezerlou
    2nd International Conference on Nanotechnology (ICN 2014), 2014
25. "Optimization of Nano Calcium Carbonate Production Process using Taguchi Method"
    Mohammad Tahmasebipour, Seyed Masoud Mirzaei Moghadam
    4th International Conference on Nano Science and Technology, 2013
26. "Electro-Spark Nanomachining Process Simulation"
    Mohammad Tahmasebipour, Younes Tahmasebipour, Majid Ghoreishi
    4th International Conference on Nano Science and Technology, 2013
27. "Thermal Model of the Electro-Spark NanoMachining Process"
    Mohammad Tahmasebipour, Younes Tahmasebipour, Majid Ghoreishi
    4th International Conference on Nano Science and Technology, 2013
28. "Growth of Carbon Nanotube on STM Tungsten Nanotip"
    Mohammad Tahmasebipour, Mohamad Hesein Ghajar, Amir Abdullah
    3rd International Congress of Nanoscience and Nanotechnology, 2010
29. "Fabrication of STM W nanotip by electrochemical etching method"
    Mohammad Tahmasebipour, Vahid Ahmadi, Amir Abdullah, Yousef Hojjat
    2nd International Conference on Nanotechnology, 2008
30. "Investigation of Crystalline Deformation of Au Nanowire in Different Applied Temperatures using Molecular Dynamics Simulation"
    Mohammad Tahmasebipour, Mehrzad Modarres
    1st National Conference on Micro/Nanoscale Technologies, 2018
31. "Simulation of a MEMS Switch based on a Piezoelectric Cantilever"
    Mohammad Tahmasebipour, Mohammad Sangchap, Mojtaba Toufan
    International Conference on Fundamental Research in Electrical Engineering, 2017
32. "Optimization of an Electromechanical Energy Harvester based on Piezoelectric Cantilever"
    Mohammad Tahmasebipour, Mohammad Sangchap
    International Conference on Fundamental Research in Electrical Engineering, 2017
33. "Investigation of piezoelectric ring geometrical parameters effect on its linear displacement using finite element analysis method"
    Ali Attar Lamraski, Hasan Raji, Mohammad Tahmasebipour
    International Conference on Fundamental Research in Electrical Engineering, 2017
34. "Mechanical Behavior Simulation of the Micro Piezoresistive Pressure Sensor"
    Mohammad Tahmasebipour, Mehrzad Modarres
    International Conference on Electrical Engineering, 2016
35. "Modeling of Microelectromechanical Temperature Sensor Behavior using Finite Element Method"
    Mohammad Sangchap, Mohammad Tahmasebipour
    The First International Conference on New Research Achievements in Electrical and Computer Engineering, 2016
36. "Effect of Geometrical Characteristics on the Thermal MEMS Accelerometer Sensor"
    Shabnam Ghaderi, Ebrahim Abbaspour Sani, Mohammad Tahmasebipour
    The 24th Iranian Conference on Electrical Engineering, 2016
37. "Modeling of the MEMS Piezoelectric Accelerometer using Finite Element Method"
    Mohammad Tahmasebipour, Ali Vafaei
    The 24th Iranian Conference on Electrical Engineering, 2016
38. "Effect of the Poisson's Ratio on the Resonant Frequency and Maximum Displacement of the Microbeam"
    Mohammad Tahmasebipour, Hossein Salarpour
    The 24th Annual International Conference on Mechanical Engineering, 2016
39. "Investigation of Size Effect on Pull-in Instability in Electrostatically Actuated Microbeams"
    Mohammad Tahmasebipour, Hossein Salarpour, Maryam Sabet Imani
    International Conference on Mechanical and Aerospace Engineering, 2016
40. "Modeling of dielectric effect on the pull-in instability in electrostatically actuated microbeams using finite element method"
    Mohammad Tahmasebipour, Hossein Salarpour, Golfam Sadeghian
    International Conference on Mechanical and Aerospace Engineering, 2016
41. "Simulation of EWOD Digital Microfluidic System using Finite Element Method"
    Mehrzad Modarres, Mohammad Tahmasebipour
    First National Congress on Microfluidics and its application in Medicine and Engineering, 2016
42. "Comparison of AF1600/TiO2 and AF1600/Si3N4 Dielectrics Stability in EWOD Microfluidics Systems"
    Mahsa Madadi Masouleh, Mohammad Tahmasebipour
    First National Congress on Microfluidics and its application in Medicine and Engineering, 2016
43. "Effect of Heater Characteristics on the Electrical Energy Consumption in Thermal MEMS Accelerometer"
    Shabnam Ghaderi, Ebrahim Abbaspour Sani, Mohammad Tahmasebipour
    3rd National and First International Conference in applied research on Electrical, Mechanical and Mechatronics Engineering, 2016
44. "Fabrication of an Electromagnetic Microfluidics System for Drug Delivery"
    Hossein Khaleghi, Mohammad Tahmasebipour
    The International Conference on New Research in Industry and Mechanical Engineering, 2015
45. "Analysis of PMMA Molecule Energy Levels"
    Hadi Khezerlou, Mohammad Tahmasebipour
    The First National Conference on Nanochemistry & Nanotechnology, 2015
46. "Investigation of Mechanical Behavior of Graphene-PMMA Nanocomposite"
    Hadi Khezerlou, Mohammad Tahmasebipour
    The First National Conference on Nanochemistry & Nanotechnology, 2015
47. "Analysis of Interatomic Stress and Energy Levels of Graphene Nanoplates"
    Hadi Khezerlou, Mohammad Tahmasebipour
    The First National Conference on Nanochemistry & Nanotechnologychemi, 2015
48. "Modeling of Vibrational Behavior of Silicon-Based Microcantilever"
    Hossein Salarpour, Mohammad Tahmasebipour, Roghayeh Ghasempour
    2nd National Conference on Applied Research in Electricity, Mechanic and Mechatronic, 2015
49. "Comparison Between Vibrational behavior of Silicon and Polysilicon Based Microcantilevers"
    Hossein Salarpour, Mohammad Tahmasebipour, Roghayeh Ghasempour
    2nd National Conference on Applied Research in Electricity, Mechanic and Mechatronic, 2015
50. "Au Nanodisc Analysis under Coupled Mechanical-Thermal Stresses using Molecular Dynamics Simulation"
    Mohammad Tahmasebipour, Mohammad Jafari
    the 2nd National Conference on Nanotechnology from Theory to Application, 2014
51. "Investigation of the Thermal Effect on the Au Nanodisc using Molecular Dynamics Simulation"
    Mohammad Tahmasebipour, Mohammad Jafari
    the 2nd National Conference on Nanotechnology from Theory to Application, 2014
52. "Intelligent system of speed control for auto transmission cars in high traffic streets and speed ramps"
    Mehran Razaghi Ghale, Keivan Fardi, Mohammad Tahmasebipour
    Third International conference on Industrial Automation, 2013
53. "Simulation of Nanocrater Yielded from Nano-EDM Process on the Workpiece"
    Younes Tahmasebipour, Majid Ghoreishi, Mohammad Tahmasebipour
    11th Manufacturing Engineering Conference, 2010
54. "Thermal Modeling of Workpiece in Nano-EDM Process"
    Younes Tahmasebipour, Mohammad Tahmasebipour, Majid Ghoreishi
    11th Manufacturing Engineering Conference, 2010
55. "Design, Performance and Modeling of Nano-Electrical Discharge Machining Process"
    Mohammad Tahmasebipour, Yousef Hojjat, Vahid Ahmadi, Amir Abdullah
    6th Nanotechnology Iranian Student Conference, 2009