Journal Paper

1. "A rate-dependent crack bridging model for dynamic fracture of CNT-reinforced polymers"
   Reza Yazdanparast, Roham Rafiee
   ENGINEERING FRACTURE MECHANICS, Vol. 311, 2024
2. "A 3D nonlinear viscoelastic–viscoplastic constitutive model for dynamic response of an epoxy resin"
   Reza Yazdanparast, Roham Rafiee
   ACTA MECHANICA, Vol. 235, 2024
3. "Dynamic mechanical behavior of CNT-reinforced epoxy under medium-strain rate: A comparative study"
   Reza Yazdanparast, Roham Rafiee, Hamed Kalhori, Bing Li
   COMPOSITE STRUCTURES, Vol. 344, 2024
4. "On the application of genetic algorithm for predicting the strength of CNT/ABS filaments using multi-scale modeling"
   Roham Rafiee, Hirad Amohaji
   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 130, 2024
5. "A rate-dependent cohesive zone model for dynamic crack growth in carbon nanotube reinforced polymers"
   Reza Yazdanparast, Roham Rafiee
   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 300, 2024
6. "Predicting mechanical properties of 3D printed nanocomposites using multi-scale modeling"
   Roham Rafiee, Hadis Zehtabzadeh, Mohammad Reza Amini
   Additive Manufacturing, Vol. 83, No 104055, 2024
7. "Effect of thermoplastic particles on the mechanical performance and damage failure of notched fiber metal laminated"
   Hussein Dalfi, Roham Rafiee, Anwer Al-Obaid, Nazar ABDULRIDHA
   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Vol. xx, 2024
8. "A 3D viscoelastic–viscoplastic behavior of carbon nanotube‐reinforced polymers: Constitutive model and experimental characterization"
   Reza Yazdanparast, Roham Rafiee
   POLYMER COMPOSITES, Vol. 44, No 8, 2024
9. "Examining Tensile Properties in Nanocomposite Samples Fabricated through Extrusion-Based Additive Manufacturing"
   Roham Rafiee, Mohammad Reza Amini, Hadis Zehtabzadeh
   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. xx, 2023
10. "Optimization of the mechanical performance and damage failure characteristics of laminated composites based on fiber orientation"
    Hussein Dalfi, Anwar Al-Obaid, Abdalameer Tariq, Hussein Razzaq, Roham Rafiee
    Frontiers of Structural and Civil Engineering, Vol. 17, No 2023, 2023
11. "On the strength of polymeric composites exposed to long-term Ultra-Violent radiation"
    Roham Rafiee, Amir Hossein Rahimi
    JOURNAL OF COMPOSITE MATERIALS, Vol. 57, No 17, 2023
12. "Investigating long‐term creep in a composite pipe subjected to transverse loading and aqueous condition"
    Roham Rafiee, Mohammad Naghi Arabian
    POLYMER COMPOSITES, Vol. 44, No 8, 2023
13. "Linkage Learning Optimization of Aeroelastic and Structural Behavior of Composite Wings"
    Roham Rafiee, Touraj Farsadi, Majid Ahmadi Tehrani, Parsa Sharifi
    International Journal of Aeronautical and Space Sciences, Vol. 24, No 2023, 2023
14. "Investigating the influence of pull-out speed on the interfacial properties and the pull-out behavior of CNT/polymer nanocomposites"
    Reza Yazdanparast, Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 316, No 117049, 2023
15. "Randomized Kaczmarz and Landweber Algorithms for Impact Force Identification on a Composite Panel"
    Hamed Kalhori, Roham Rafiee, Lin Ye, Ben Halkon, Muhammad Bahmanpour
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, Vol. 176, No 176, 2023
16. "A micro-macromechanical approach for analyzing creep in randomly oriented short fiber composites"
    Roham Rafiee, Ali Ghamarzadeh
    POLYMER COMPOSITES, Vol. x, 2023
17. "Filament wound pipes optimization platform development: A methodological approach"
    Roham Rafiee, Reza Shahzadi, Soheil Jafari
    COMPOSITE STRUCTURES, Vol. 297, 2022
18. "Structural optimization of filament wound composite pipes"
    Roham Rafiee, Reza Shahzadi, Hossein Speresp
    Frontiers of Structural and Civil Engineering, Vol. x, 2022
19. "Estimating the burst pressure of a filament wound composite pressure vessel using two-scale and multi-scale analyses"
    Roham Rafiee, Amirhesam Salehi
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 1, No 1, pp.1-16, 2022
20. "A novel recursive multi-scale modeling for predicting the burst pressure of filament wound composite pressure vessels"
    Roham Rafiee, Amirhesam Salehi
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 128, No 5, 2022
21. "Experimental investigation of graphene nanoplatelets effect on the fatigue behavior of basalt/epoxy composite pressure vessels"
    Harun Sepetcioglu, Necmettin Tarakcioglu, Roham Rafiee
    THIN-WALLED STRUCTURES, Vol. 171, No 171, 2022
22. "Dental composites with strength after aging improved by using anodic nanoporous fillers: experimental results, modeling, and simulations"
    Amin Ghorbanhosseini, Roham Rafiee, Andrei Pligovka, Marco Salerno
    ENGINEERING WITH COMPUTERS, Vol. xx, 2022
23. "Determining in-plane material properties of square core cellular materials using computational homogenization technique"
    Reza Yazdanparast, Roham Rafiee
    ENGINEERING WITH COMPUTERS, Vol. xx, 2022
24. "A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part I, model development"
    Roham Rafiee, Sina Sotoudeh Shadbad
    COMPOSITE STRUCTURES, Vol. 277, No 277, 2021
25. "A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part II, numerical and experimental analyses"
    Roham Rafiee, Sina Sotoudeh Shadbad
    COMPOSITE STRUCTURES, Vol. 277, No 277, 2021
26. "Numerical investigation of the effect of moisture and impurity on long-term creep behavior of polymer composite pipes"
    Arman Khademi, Armin Yousefi, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani, Roham Rafiee
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, Vol. 193, No 193, 2021
27. "Multi-scale Modeling of Polymeric Composites Including Nanoporous Fillers of Milled Anodic Alumina"
    Roham Rafiee, Amirali Eskandriyun, Claudio Larosa, Marco Salerno
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. xx, 2021
28. "Numerical and experimental analyses of the hoop tensile strength of filament wound composite tubes"
    Roham Rafiee, Faramarz Abbasi
    MECHANICS OF COMPOSITE MATERIALS, Vol. 56, No 4, pp.423-436, 2020
29. "Developing a homogenization approach for estimation of in-plan effective elastic moduli of hexagonal honeycombs"
    Reza Yazdanparast, Roham Rafiee
    ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, Vol. 117, No 117, pp.202-211, 2020
30. "Analyzing the long-term creep behavior of composite pipes: Developing an alternative scenario of short-term multi-stage loading test"
    Roham Rafiee, Amin Ghorbanhosseini
    COMPOSITE STRUCTURES, Vol. x, 2020
31. "Predicting the strength of carbon nanotube reinforced polymers using stochastic bottom-up modeling"
    Roham Rafiee, Hadis Zehtabzadeh
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 126, No 8, 2020
32. "Fatigue analysis of a composite ring: Experimental and theoretical investigations"
    Roham Rafiee, Faramarz Abbasi, Sattar Maleki
    JOURNAL OF COMPOSITE MATERIALS, Vol. x, 2020
33. "Predicting Young’s modulus of agglomerated graphene/polymer using multi-scale modeling"
    Roham Rafiee, Amirali Eskandriyun
    COMPOSITE STRUCTURES, Vol. xx, 2020
34. "Investigating the influence of bonded and non-bonded interactions on the interfacial bonding between carbon nanotube and polymer"
    Roham Rafiee, Mostafa Sahraei
    COMPOSITE STRUCTURES, Vol. 238, No 111996, 2020
35. "Theoretical and numerical analyses of composite cylinders subjected to the low velocity impact"
    Roham Rafiee, Amin Ghorbanhosseini, Shiva Rezaee
    COMPOSITE STRUCTURES, Vol. 226, No 226, 2019
36. "Stochastic failure analysis of composite pipes subjected to random excitation"
    Roham Rafiee, Parsa Sharifi
    CONSTRUCTION AND BUILDING MATERIALS, Vol. 224, No 224, 2019
37. "Investigating the Influence of Delamination on the Stiffness of Composite Pipes Under Compressive Transverse Loading Using Cohesive Zone Method"
    Sattar Maleki, Roham Rafiee, Abolfazl Hasannia, Mohammad Reza Habibagahi
    Frontiers of Structural and Civil Engineering, Vol. 13, No 13, 2019
38. "Estimating Young's modulus of graphene/polymer composites using stochastic multi-scale modeling"
    Roham Rafiee, Amirali Eskandriyun
    COMPOSITES PART B-ENGINEERING, Vol. x, 2019
39. "3D Stress Analysis of Generally Laminated Piezoelectric Plates with Electromechanical Coupling Effects"
    Atieh Andakhshideh, Roham Rafiee, Sattar Maleki
    applied mathematical modeling, Vol. x, 2019
40. "Equivalent reinforcement isotropic model for fracture investigation of orthotropic materials"
    Mehdi Fakoorsaghieh, Roham Rafiee, Zare hossein abadi Shahab
    STEEL AND COMPOSITE STRUCTURES, Vol. 30, No 1, pp.1-12, 2019
41. "A Study on Fracture Behavior of Semi-Elliptical 3D Crack in Clay-Polymer Nanocomposites Considering Interfacial Debonding"
    Meghdad Zahedi, Reza Maleki Moghadam, Roham Rafiee, Ugo Icardi
    ENGINEERING FRACTURE MECHANICS, Vol. 209, pp.245-259, 2019
42. "The influence of hygrothermal environments on the stress concentration in unidirectional composite lamina"
    Saeid Rahnama, Roham Rafiee, Mehdi Maleki
    MECHANICS OF MATERIALS, Vol. 129, No 129, pp.332-340, 2019
43. "Predicting mechanical properties of nanoclay/polymer composites using stochastic approach"
    Roham Rafiee, Reza Shahzadi
    COMPOSITES PART B-ENGINEERING, Vol. 152, No 152, pp.31-42, 2018
44. "Evaluating mechanical performance of GFRP pipes subjected to transverse loading"
    Roham Rafiee, Mohammad Reza Habibagahi
    THIN-WALLED STRUCTURES, Vol. 131, pp.347-359, 2018
45. "On The Stiffness Prediction of GFRP Pipes Subjected to Transverse Loading"
    Roham Rafiee, Mohammad Reza Habibagahi
    KSCE Journal of Civil Engineering, Vol. x, 2018
46. "Investigating structural failure of a filament-wound composite tube subjected to internal pressure: Experimental and theoretical evaluation"
    Roham Rafiee, Mohammadali Torabi, Sattar Maleki
    POLYMER TESTING, Vol. xx, 2018
47. "Mechanical Properties of Nanoclay and Nanoclay Reinforced Polymers: A Review"
    Roham Rafiee, Reza Shahzadi
    POLYMER COMPOSITES, Vol. x, 2018
48. "Stochastic Prediction of Burst Pressure in Composite Pressure Vessels"
    Roham Rafiee, Mohammad Ali Torabi
    COMPOSITE STRUCTURES, Vol. 185, No 185, pp.573-583, 2017
49. "Comparative study on predicting Young's modulus of graphene sheets using nano-scale continuum mechanics approach"
    Roham Rafiee, Amirali Eskandriyun
    PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, Vol. 90, No 90, pp.42-48, 2017
50. "Stochastic fatigue analysis of glass fiber reinforced polymer pipes"
    Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 167, No 167, pp.96-102, 2017
51. "Investigating interaction between CNT and polymer using cohesive zone model"
    Roham Rafiee, Amin Ghorbanhosseini
    POLYMER COMPOSITES, Vol. xx, 2017
52. "Stochastic multi-scale modeling of randomly grown CNTs on carbon fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    MECHANICS OF MATERIALS, Vol. 106, No 106, pp.1-7, 2017
53. "Theoretical modeling of fatigue phenomenon in composite pipes"
    Roham Rafiee, Ferestesh Eslami
    COMPOSITE STRUCTURES, Vol. 161, No 161, pp.256-263, 2017
54. "Electrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites"
    Alireza Nikfarjam, Roham Rafiee, Mostapha Taheri
    Polyolefins Journal, Vol. 1, No 4, pp.43-68, 2017
55. "Predicting mechanical properties of fuzzy fiber reinforced composites: radially grown carbon nanotubes on the carbon fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    International Journal of Mechanics and Materials in Design, Vol. 12, No 4, pp.1-12, 2016
56. "The influence of material properties on the aeroelastic behavior of a composite wind turbine blade"
    Roham Rafiee, Mohsen Moradi, Motahareh Khanpour
    Journal of Renewable and Sustainable Energy, Vol. 08, No 8, pp.63305-1, 2016
57. "Evaluating long-term performance of Glass Fiber Reinforced Plastic pipes subjected to internal pressure"
    Roham Rafiee, Behzad Mazhari
    CONSTRUCTION AND BUILDING MATERIALS, Vol. 122, No 122, pp.694-701, 2016
58. "A study on nonlinear vibration behavior of CNT-based representative volume element"
    Majid Jamal-omidi, Mahdi Shayanmehr, Saeed Shokrollahi, Roham Rafiee
    AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 55, No 55, pp.272-281, 2016
59. "A study on equivalent spherical structure of buckyball-C60 based on continuum shell model"
    Majid Jamal-omidi, Mahdi Shayanmehr, Roham Rafiee
    Latin American Journal of Solids and Structures, Vol. 2016, No 13, pp.1016-1029, 2016
60. "On the mechanical performance of glass-fibre-reinforced thermosetting-resin pipes: A review"
    Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 143, pp.151-164, 2016
61. "A Study on Equivalent Spherical Structure of Buckyball-C 60 Based on Continuum Shell Model"
    Majid Jamal-omidi, Mahdi Shayanmehr, Roham Rafiee
    Latin American Journal of Solids and Structures, Vol. 13, No 5, pp.1016-1029, 2016
62. "Simulation of aeroelastic behavior in a composite wind turbine blade"
    Roham Rafiee, Mojtaba Tahani, Mohsen Moradi
    JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, Vol. 151, No 151, pp.60-69, 2016
63. "Characterizing nanotube–polymer interaction using molecular dynamics simulation"
    Roham Rafiee, Mohammad Mahdavi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 112, pp.356-363, 2016
64. "Advances in Characterization and Modeling of Nanoreinforced Composites"
    Roham Rafiee, Timon Rabczuk, Abbas S. Milani, Konstantinos Tserpes
    Journal of Nanomaterials, Vol. 2016, pp.1-1, 2016
65. "The influence of production inconsistencies on the functional failure of GRP pipes"
    Roham Rafiee, Mehdi Fakoorsaghieh, Hadi Hesamsadat
    STEEL AND COMPOSITE STRUCTURES, Vol. 19, No 6, pp.1369-1379, 2015
66. "Simulation of the long-term hydrostatic tests on Glass Fiber Reinforced Plastic pipes"
    Roham Rafiee, Behzad Mazhari
    COMPOSITE STRUCTURES, Vol. 136, No 136, pp.56-63, 2015
67. "Modeling creep in polymeric composites: Developing a general integrated procedure"
    Roham Rafiee, Behzad Mazhari
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 99, No 99, pp.112-120, 2015
68. "Molecular dynamics simulation of defected carbon nanotubes"
    Roham Rafiee, Mohammad Mahdavi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. x, No 1, pp.1-9, 2015
69. "Stochastic analysis of functional failure pressures in glass fiber reinforced polyester pipes"
    Roham Rafiee, Farshid Reshadi, Saied Eidi
    MATERIALS & DESIGN, Vol. 67, No 2015, pp.422-427, 2014
70. "Multi-scale modeling of carbon nanotube reinforced polymers using irregular tessellation technique"
    Roham Rafiee, Vahid Firouzbakht
    MECHANICS OF MATERIALS, Vol. 78, No 78, pp.74-84, 2014
71. "Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters"
    Nam Vu-bac, Roham Rafiee, Xiaoyang Zhuang, Tomb Lahmer, Timon Rabczuk
    COMPOSITES PART B-ENGINEERING, Vol. 68, No 68, pp.446-464, 2014
72. "Preface to the Special issue Computational modeling of polymeric composites"
    Timon Rabczuk, Roham Rafiee, Xiaoying Zhuang
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, No 96, 2014
73. "The Influence of CNT Contents on the Electrical and Electromagnetic Properties of CNT/Vinylester"
    Roham Rafiee, Mohammad Hossein Sabour, Alireza Nikfarjam, Mostapha Taheri
    JOURNAL OF ELECTRONIC MATERIALS, Vol. 43, No 9, pp.3477-3485, 2014
74. "Simulation of functional failure in GRP mortar pipes"
    Roham Rafiee, Farshid Reshadi
    COMPOSITE STRUCTURES, Vol. 113, No 113, pp.155-163, 2014
75. "Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer"
    Roham Rafiee, Vahid Firouzbakht
    Mechanics of Advanced Composite Structures, Vol. 1, No 1, pp.9-16, 2014
76. "Modeling and experimental evaluation of functional failure pressures in glass fiber reinforced polyester pipes"
    Roham Rafiee, Ali Amini
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, No 96, 2014
77. "Influence of CNT functionalization on the interphase region between CNT and polymer"
    Roham Rafiee, Reza Pourazizi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, No 96, 2014
78. "Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling"
    Hamid Ghasemi, Roham Rafiee, Xiaoying Zhuang, Jacob Muthu, Timon Rabczuk
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 85, No 85, pp.295-305, 2014
79. "On the modeling of carbon nanotubes: A critical review"
    Roham Rafiee, Reza Maleki Moghadam
    COMPOSITES PART B-ENGINEERING, Vol. 56, No 56, pp.435-449, 2014
80. "Aeroelastic investigation of a composite wind turbine blade"
    Roham Rafiee, Mehdi Fakoorsaghieh
    WIND AND STRUCTURES, Vol. 17, No 6, pp.671-680, 2013
81. "Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion"
    Mehdi Fakoorsaghieh, Roham Rafiee
    STRENGTH OF MATERIALS, Vol. 45, No 3, pp.378-385, 2013
82. "Preface to special issue Theoretical and Experimental Characterization of Composites"
    Roham Rafiee, Mojtaba Haghighi Yazdi
    International Journal of Composite Materials, Vol. 3, 2013
83. "Influence of carbon nanotube waviness on the stiffness reduction of CNT/polymer composites"
    Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 97, pp.304-309, 2013
84. "Experimental and theoretical investigations on the failure of filament wound GRP pipes"
    Roham Rafiee
    COMPOSITES PART B-ENGINEERING, Vol. 45, No 1, pp.257-267, 2013
85. "Apparent hoop tensile strength prediction of glass fiber - reinforced polyester pipes"
    Roham Rafiee
    JOURNAL OF COMPOSITE MATERIALS, Vol. 47, No 1, 2013
86. "Modeling, Characterization, and Processing of Advanced Composites"
    Philip Harisson, Abbas S. Milani, Roham Rafiee
    Advances in Materials Science and Engineering, Vol. 2013, No 2013, pp.1-2, 2013
87. "Challenges of the Modeling Methods for Investigating the Interaction between the CNT and the Surrounding Polymer"
    Roham Rafiee, Timon Rabczuk, Reza Pourazizi, Junhua Zhao, Yancheng Zhang
    Advances in Materials Science and Engineering, Vol. 2013, No 2013, pp.1-10, 2013
88. "Transition Angle a Novel Concept for Predicting the Failure Mode in Orthotropic Materials"
    Mehdi Fakoorsaghieh, Roham Rafiee
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 1, No 1, 2012
89. "Transition angle a novel concept for predicting the failure mode in orthotropic materials"
    Mahdi Fakoor , Roham Rafiee
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 1, No 2, pp.100-108, 2012
90. "Modal analysis of carbon nanotube reinforced polymer using multi - scale finite element method"
    Abdolhossain Fereydon, Roham Rafiee, Reza Maleki Moghadam
    MECHANICS OF COMPOSITE MATERIALS, Vol. 5, No 2, pp.225-232, 2012
91. "Simulation of Impact and Post - impact Behavior of Carbon Nanotube Reinforced Polymer Using Multi - scale Finite Element Modeling"
    Roham Rafiee, Reza Maleki Moghadam
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 63, No 63, pp.261-268, 2012
92. "Influence of non - bonded interphase on crack driving force in carbon nanotube reinforced polymer"
    Roham Rafiee, Abdolhossein Fereydun , Meghdad Heiydar Haei
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 56, pp.25-28, 2012
93. "Investigation of chirality and diameter effects on the Youngs modulus of carbon nanotubes using non - linear potentials"
    Roham Rafiee, Meghdad Heidarhaeib
    COMPOSITE STRUCTURES, Vol. 94, No 8, pp.2460-2464, 2012
94. "Theoretical and experimental investigation of nanocomposite filament strength"
    Roham Rafiee, هیراد عموحاجی
    Journal of Sciences and Technology of Composites, Vol. 11, No 1, 2024
95. "Reliability Analysis of Failure in Composite Pressure Vessels"
    Roham Rafiee, Sahar Bazargani
    Journal of Manufacturing Engineering, Vol. 8, No 4, pp.50-61, 2021
96. "Characterization of the electrical and electromagnetic properties of CNT-based Nanocomposites"
    Alireza Nikfarjam, Roham Rafiee, Mohammad Hossein Sabour, Mostapha Taheri
    Mechanical Engineering modares, Vol. 13, No 12, pp.88-100, 2014
97. "The effects of structural defects on the mechanical properties of CNT"
    Roham Rafiee, Reza Pourazizi
    Mechanical Engineering modares, Vol. 13, No 13, pp.165-175, 2014
98. "Nonlinear vibration analysis of CNT using perturbation technique"
    Roham Rafiee
    Mechanical Engineering modares, Vol. 12, No 3, 2012

Conference Paper

1. "Integrated Platform for Design, Analysis and Optimization of Composite Pipes"
   Roham Rafiee
   International Conference on Materials Physics and Composites (ICMPC 2024), 2024
2. "On the development of industrial-scale composite pipes"
   Roham Rafiee
   4th International Conference on Applied Mechanics and Mechanical Engineering (ICAMME), 2023
3. "Predicting burst pressure of a Type III hydrogen pressure vessels using multi-scale modeling"
   Roham Rafiee, Amirhesam Salehi
   International Conference on Basic Sciences, Engineering and Technology, 2021
4. "On the Simulating CNT-Polymer Interaction Using Different Approaches"
   Roham Rafiee
   2nd Intl. Conference on Nanotechnology & Nanoscience, 2021
5. "Theoretical and experimental study of long-term creep in multilayered composites"
   Roham Rafiee, Amin Ghorbanhosseini
   Data Driven Computing and Machine Learning in Engineering, 2019
6. "Developing a Novel Formulation for Predicting Young's Modulus of CNT Reinforced Polymers Using Stochastic Multi-Scale Modeling"
   Roham Rafiee
   International Conference on Chemical Physics and Materials Science (ICCPMS19), 2019
7. "Stochastic determination of failure in filament wound composite tubes"
   Roham Rafiee, Mohammadali Torabi
   International conference on mechanics of composites (MECHCOMP2019), 2019
8. "Predicting Young's modulus of graphene reinforced polymers"
   Roham Rafiee, Amirali Eskandriyun
   International Conference on Mechanics of Composites (MechComp2019), 2019
9. "Estimating Young's modulus of Nanoclay Reinforced Polymers Using Stochastic Approach"
   Roham Rafiee, Reza Shahzadi
   12th international conference on Advanced Computational Engineering & Experimenting, 2018
10. "Simulation of Split-disk Experiment for Determining Hoop Tensile Strength of FRP Pipes"
    Roham Rafiee
    12th International Conference on Advanced Computational Engineering and Experimenting, 2018
11. "Prediction of burst pressure in composite pressure vessels"
    Roham Rafiee, Mohammadali Torabi
    12th International conference in Advanced Computational Engineering and Experimenting, 2018
12. "Mechanical performance of composite pipes under compressive transverse loading: Analytical and numerical approaches"
    Roham Rafiee, Mohammad Reza Habibagahi
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
13. "Comparing different approaches to simulate CNT and polymer interaction"
    Roham Rafiee, Amin Ghorbanhosseini, Mohammad Mahdavi
    20th International Conference on Composite Structures (ICCS20), 2017
14. "Predicting long-term hydrostatic pressure of GRP mortar pipes"
    Roham Rafiee, Behzad Mazhari
    20th International Conference on Composite Structures (ICCS20), 2017
15. "Stochastic determination of cnt coated fibers properties"
    Roham Rafiee, Amin Ghorbanhosseini
    Advanced Computational Engineering and Experimenting (ACEX2017), 2017
16. "On the strength of GRP pressure pipes with addition of sand filler"
    Roham Rafiee
    Advanced Computational Engineering and Experimenting (ACEX-2017), 2017
17. "Predicting mechanical properties of graphene sheets"
    Roham Rafiee, Amirali Eskandriyun
    Advanced Computational Engineering and Experimenting (ACEX2017), 2017
18. "The Influence of Vacancy Defects on The Young’s Modulus of Graphene Sheets"
    Roham Rafiee, Amirali Eskandariyun
    The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), 2016
19. "On the mechanical properties of CNT grown fibers"
    Roham Rafiee, Amin Ghorbanhosseini
    5th International Conference on Nanomaterials, Nanostructures and Nanoegnineering (ICNNN2016), 2016
20. "Fatigue analysis of composite pipes using progressive damage modeling"
    Roham Rafiee, Fereshteh Eslami
    19th International Conference on Composite Structures (ICCS19), 2016
21. "Modeling graphene sheets using nano-scale continuum mechanics approach"
    Roham Rafiee, Amirali Eskandariyun
    19th International Conference on Composite Structures (ICCS19), 2016
22. "Hierarchichal multi-scale modeling of CNT-coated fiber-reinforced laminates"
    Roham Rafiee, Amin Ghorbanhosseini
    40th Solid Mechanics Conference (SolMech2016), 2016
23. "ANALYZING STRUCTURAL BAHAVIOR OF A COMPOSITE WIND TURBINE BLADE USING SIMPLIMED MODELING"
    Roham Rafiee, Motahhare Khanpour
    40th Solid Mechanics Conference (SolMech2016), 2016
24. "Aeroelastic Instability Analysis of a Composite Wind Turbine Blade"
    Roham Rafiee, Mohsen Moradi
    18th International Conference on Composite Structures (ICCS18), 2015
25. "Predicting Mechanical Properties of Fuzzy Fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    18th International Conference on Composite Structures (ICCS18), 2015
26. "On The Long-term Behavior of Glass Fiber Reinforced Polyester Pipes"
    Roham Rafiee, Behzad Mazhari
    18th International Conference on Composite Structures, 2015
27. "A Method for Predicting Long Term Creep and Creep Failure in GRP Pipes"
    Roham Rafiee, Behzad Mazhari
    1st International Conference on Composite Pipes, Vessels & Tanks (CPVT), 2015
28. "Investigating inconsistencies of discontinuous filament winding process on functional failure pressures of GRP pipes"
    Roham Rafiee
    1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), 2015
29. "Predicting functional failure pressures in GRP and GRP Mortar pipes"
    Roham Rafiee, Hadi Hesamsadat
    1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), 2015
30. "Simulation of long-term behavior in composite pipes"
    Roham Rafiee, Behzad Mazhari
    The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 2014
31. "Investigation of Functional Failure of Composite Pipes"
    Roham Rafiee, Hadi Hesamsadat
    first international conference on mechanics of composites, 2014
32. "A novel formulation for predicting mechanical properties of CNT-based composites"
    Roham Rafiee, Vahid Firouzbakht
    first international conference on mechanics of composites, 2014
33. "Predicting functional failure pressures in filament wound GRP mortar pipes"
    Roham Rafiee, Farshid Reshadi, Ali Amini
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
34. "On the meso-scale modeling of carbon nanotube reinforced polymer"
    Roham Rafiee, Vahid Firouzbakht
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
35. "Stochastic determination of functional failure pressures in FRP pipes"
    Roham Rafiee, Hadi Hesamsadat
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
36. "Hoop tensile strength prediction of filament wound mortar pipes"
    Roham Rafiee
    ICCS17, 2013
37. "Evaluation of the electrical and electromagnetic properties of CNT-based composites"
    Roham Rafiee, Mohammad Hossein Sabour, Alireza Nikfarjam, Mostafa Taheri
    ICCS17, 2013
38. "On the mechanical properties of defected graphene sheets and CNTs"
    Roham Rafiee, Reza Pourazizi
    ICCS17, 2013
39. "Failure analysis of GRP pipes under internal pressure"
    Roham Rafiee
    CCFA-3, 2012
40. "NUMERICAL MODAL ANALYSIS OF AN EMBEDDED CARBON NANOTUBE IN A POLYMER MATRIX"
    Roham Rafiee, Reza Maleki Moghadam
    20th Annual International Conference on Composites or Nano Engineering, 2012
41. "MULTI-SCALE MODELING OF IMPACT BEHAVIOR OF CARBON NANOTUBE REINFORCED POLYMER"
    Roham Rafiee, Reza Maleki Moghadam
    20th Annual International Conference on Composites or Nano Engineering (ICCE-20, 2012
42. "INVESTIGATION OF STRAIN ENERGY RELEASE RATE IN CARBON NANOTUBE-BASED COMPOSIETS"
    Roham Rafiee, Seyed Meghdad Heydarhaie
    Mechanics of Nano Micro and Macro Composite Structures, 2012
43. "ON THE REINFORCEMENT EFFICIENCY OF WAVY CARBON NANOTUBES"
    Roham Rafiee
    Mechanics of Nano Micro and Macro Composite Structures, 2012
44. "Progressive failure analysis of GRP pipes: Modeling and experimental evaluation"
    Roham Rafiee
    The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012, 2012
45. "Youngs Modulus Prediction of Carbon Nanotubes Using Full Nonlinear Interatomic Potentials"
    Roham Rafiee, Meghdad Heydarhaei
    16th International Conference on Composite Structures (ICCS16, 2011
46. "Development of a stochastic simulation to predict elastic properties of carbon nanotube reinforced composites"
    Mahmood M. Shokrieh, Roham Rafiee
    International Conference on Composite Structure (ICCS16, 2011
47. "Calculating Dynamic Fracture toughness of polymers and polymeric nanocomposites under various strain rates"
    Reza Yazdanparast, Roham Rafiee
    22nd International Conference of Iranian Aerospace Society, 2024
48. "A rate dependent nonlinear VE-VP material model for Epon-828 epoxy resin"
    Reza Yazdanparast, Roham Rafiee
    7th national conference on Mech. and Aerospace Eng., 2023
49. "Predicting creep behavior of shor-fiber composites using laminate analogy"
    Ali Ghamarzadeh, Roham Rafiee
    3rd national conference on applications of composites in Iran industries, 2023
50. "On the effects of UV rays of sunlight on the mechanical properties of polymeric composites"
    Roham Rafiee, Amir Hossein Rahimi
    3rd national conference on applications of composites in Iran industries, 2023
51. "Experimental and theoretical investigations of water absorption in composite pipes under transverse loading"
    Mohammad Naghi Arabian, Roham Rafiee
    3rd national conference on applications of composites in Iran industries, 2023
52. "Investigating the influence of fiber winding pattern on the burst pressure of Type-III composite pressure vessels"
    Roham Rafiee, [] []
    Int. Conf. on Aerospace, 2022
53. "Developing an optimization procedure of Composite pipes utilized in oil and gas network"
    Roham Rafiee, حسین اسپرسپ
    Int. Conf. of Mech. Eng., 2022
54. "Comparative study on prediction of the first ply failure in composite pressure vessels"
    Roham Rafiee, Mohammadali Torabi
    Application of Composites in Iran Industries, 2017
55. "Challenges and Applications of Nanocomposites in Various Industries"
    Roham Rafiee, Parsa Sharifi, Amirali Eskandariyun
    Application of Composites in Iran Industries, 2017
56. "Quality Control Process of Composite Pipes: From raw materials to final products"
    Roham Rafiee, Reza Shahzadi
    Application of Composites in Iran Industries, 2017
57. "Simulation of ring stiffness test on GRP pipes using finite element method"
    Roham Rafiee, Mohammadreza Habibagahi
    Application of Composites in Iran Industries, 2017
58. "Predicting mechanical properties of CNT-based nanocomposites using irregular tessellation technique"
    Roham Rafiee, Vahid Firouzbakht
    ISME2016, 2016
59. "Stochastic analysis of Young's modulus of non-defected and defected CNTs using molecular dynamics"
    Roham Rafiee, Mohammad Mahdavi
    14th Conference of Iranian Aerospace Society, 2015
60. "Comparative study on creep modeling methods of polymeric composites"
    Roham Rafiee, Behzad Mazhari
    ISME2014, 2014
61. "Developing a formulation for predicting mechanical properties of CNT-based composites"
    Roham Rafiee, Vahid Firouzbakht
    13th conference of Iranian Aerospace Society, 2014
62. "Stochastic determination of failure pressure in composite pressure vessels"
    Roham Rafiee, Hadi Hesamsadat
    The 13th Conference of Iranian Aerospace Society (AERO2014), 2014
63. "The influence of functionalization on the mechanical properties of CNT-based composites"
    Roham Rafiee, Reza Pourazizi
    13th conference of Iranian Aerospace Society, 2014
64. "Investigation of electrical and electromagnetic properties of CNT-based nanocomposites using in-situ polymerization"
    Roham Rafiee, Alireza Nikfarjam, محمد حسین صبور, مصطفی طاهری
    Aero2013, 2013
65. "Impact analysis of nanocomposites reinforced by CNT using multi-scale finite element method"
    Roham Rafiee, Reza Maleki Moghadam
    ICMEAT2012, 2012
66. "Hoop Tensile Strength Prediction of Glass Fiber Reinforced Polymer Pipes"
    Roham Rafiee
    IranPipeTech2012, 2012
67. "Modal analysis of carbon nanotube based composites using multi-scale finite element modeling"
    Roham Rafiee, Reza Maleki Moghadam
    Aero2012, 2012
68. "Extracting optimum thickness of composite layers to rehabilitate corroded buried steel gas pipe"
    Roham Rafiee
    IranPipeTech2011, 2011
69. "Investigation of CNT diameter and chirality effect on Young's modulus using non-linear finite element model"
    Roham Rafiee, Seyed Meghdad Heydarhaie, Abdolhossain Fereydon
    ISME2011, 2011