Conference Paper

1. "An extension of the Equivalent Material Concept applied to fracture of U-notched solids"
   Fernando Javier Gomez, Sergio Cicero, Alireza Torabi
   1st Virtual European Conference on Fracture, 2020
2. "On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior"
   Sergio Cicero, Alireza Torabi, Hamid Reza Majidi, Fernando Javier Gomez
   1st Virtual European Conference on Fracture, 2020
3. "Application of the Fictitious Material Concept and the Theory of Critical Distances in the fracture analysis of SGFR-PA6 SENB specimens containing U-notches and different moisture contents"
   Sergio Cicero, Juan Diego Fuentes, F.T. Ibanez-Gutierrez, Virginia Madrazo, Alireza Torabi, Hamid Reza Majidi
   5th Iberian Conference on Structural Integrity (IbCSI 2020), 2020
4. "Dynamic stiffness matrix for analysis of modal properties the damaged composite wing"
   Shahrokh Shams, Alireza Torabi, Mahdi Fatehi narab
   The 18th International Conference of Iranian Aerospace Society, 2020
5. "NOTCH STRENGTH EVALUATION OF POLYMERIC BONE CEMENT WITH NONLINEAR BEHAVIOR"
   Majid Reza Ayatollahi, Alireza Torabi, Sahel Shahbaz
   5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 2019
6. "Study of the Validity of the Equivalent Material Concept in Prediction of Components Weakened by U-notches"
   Fernando Javier Gomez, Manuel Ispizua, Sergio Cicero, Alireza Torabi
   Congress of Espanian Fracture Group, 2019
7. "CRACK EXTENSION IN THIN AL 6061-T6 SHEETS UNDER MIXED MODE I/II LOADING"
   Majid Reza Ayatollahi, Alireza Torabi, Mohammad Torabi, Abdol Saleh Rahimi
   4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018 – ICAME2018, 2018
8. "Application of the equivalent material concept to fracture of Unotched solids under small scale yielding"
   Javier Gomez, Alireza Torabi
   22nd European Conference on Fracture-ECF22, 2018
9. "Brazilian disk tests: Circular holes and size effects"
   Alireza Torabi, Siavash Etesam, Alberto Sapora, Pietro Cornetti
   22nd European Conference on Fracture-ECF22, 2018
10. "APLICACIÓN DEL CONCEPTO MATERIAL EQUIVALENTE AL ESTUDIO DE LA ROTURA PRODUCIDA POR ENTALLAS EN U"
    Javier Gomez, M.a. Martin-rengel, Jesus Ruiz-hervias, Alireza Torabi
    35 Encuentro Del Grupo Espanol De Fractura, 2018
11. "Investigation of mixed mode fracture in cracked Brazilian disk specimen under compressive mode I loading"
    Majid Reza Ayatollahi, Bahador Bahrami, Alireza Torabi
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), 2018
12. "Fracture analysis of blunt V-notched PMMA under compressive-shear loading"
    Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), 2016
13. "On determination of bifurcation angle in V-notched Brazilian disc specimen under mixed mode loading"
    Alireza Torabi, Majid Reza Ayatollahi
    9th International Conference on Multiaxial fatigue and Fracture ICMFF 2010, 2010
14. "Theoretical and experimental assessment of translaminar fracture toughness for U-notched laminated composites under opening mode loading"
    Alireza Torabi, Ebrahim Pirhadi
    28th Annual International Conference of Iranian Society of Mechanical Engineering (ISME2020), 2020
15. "Experimental and theoretical investigation of the load-carrying capacity of U-notched composite laminates under pure mode II loading"
    Alireza Torabi, Ebrahim Pirhadi
    28th Annual International Conference of Iranian Society of Mechanical Engineering (ISME2020), 2020
16. "Brittle fracture analysis of notched polymeric components under pure compression"
    Alireza Torabi, Kazem Hamidi
    28th Annual Conference of Iranian Society of Mechanical Engineering (ISME2020), 2020
17. "Prediction of the growth path for a crack emanating from a notch in brittle components under mixed mode I/II loading"
    حسین امانی, Alireza Torabi, جواد اکبردوست
    17th Conference of Iranian Aerospace Society, 2018
18. "Fracture investigation of Al-Al friction-stir welded joints under tensile-shear loading"
    محمدحسن کلانتری, Alireza Torabi
    17th Conference of Iranian Aerospace Society, 2018
19. "Estimation of NOx Emission of an Experimental Swirl Stabilized Combustor Using Image Processing Methods and Data Mining Techniques"
    Alireza Torabi, Rozbeh Riazi, Mohammad Daneshi, Shidvash Vakilipour, Hadi Veisi, Hadi Zare
    The 15th International Conference of Iranian Aerospace Society, 2016
20. "On the use of the equivalent material concept in predicting the load-carrying capacity of notched Al 6061-T6 plates"
    Alireza Torabi, Mohammad Keshavarzian
    The 15th International Conference of Iranian Aerospace Society, 2016
21. "Estimation of the load-carrying capacity of ductile U-notched components with elastic-plastic behavior using brittle fracture criteria"
    Alireza Torabi, Rasool Habibi
    The 15th International Conference of Iranian Aerospace Society, 2016
22. "Fracture analysis of V-notched Al 7075 under pure mode I loading"
    Alireza Torabi, Mehran Alaei
    The 15th International Conference of Iranian Aerospace Society, 2016
23. "Statistical evaluation of the fracture of the second row turbine disk of the TG20 and W251 gas turbine units in Rey power plant"
    Alireza Torabi, Hadi Nayyeri
    The 8th Electric Power Generation Conference and Training Workshop, 2016
24. "Determination of the notch fracture toughness ratio for V-notches with end holes by experiment and theory"
    Alireza Torabi, Shahab Amininejad
    14th International Conference of Iranian Aerospace Society, 2015
25. "Experimental and theoretical investigation of brittle fractudre in key-hole notches under pure shear"
    Alireza Torabi, Shahab Amininejad, Reza Amininejad
    14th International Conference of Iranian Aerospace Society, 2015
26. "Fracture analysis of 2nd row gas turbine disk in Rey power plant"
    Alireza Torabi, Hadi Nayyeri
    7th Electric Power Generation Conference & Exhibition, 2015
27. "Fracture analysis of 32 MW gas turbine compressor rotor blade using field evidences and microscopic studies"
    Alireza Torabi, Ramin Vatandoost
    7th Electric Power Generation Conference & Exhibition, 2015
28. "Brittle fracture in V-notches with end holes under pure mode I loading"
    Alireza Torabi, Shahab Amininejad
    The 13th Conference of Iranian Aerospace Society, 2014
29. "Investigation of sudden fracture in key-hole notched components"
    Alireza Torabi, Seyyed Mostafa Abedinasab
    The 13th Conference of Iranian Aerospace Society, 2014
30. "Pure shear fracture prediction in a disk-shape brittle graphite material containing a U-notch"
    Alireza Torabi, Mehdi Fakoorsaghieh, Mohammadali Darbani
    AERO 2014, 2014
31. "Brittle fracture study in key-hole notched graphite components under mixed mode I/II loading"
    Alireza Torabi, Ebrahim Pirhadi
    The 13th Conference of Iranian Aerospace Society, 2014
32. "Theoretical and experimental analysis of brittle fracture in U-notch graphite parts under pure tension"
    Alireza Torabi, Mehdi Fakoorsaghieh, Ebrahim Pirhadi
    ISME 2013, 2013
33. "Prediction of tensile load0carrying capacity of notched ductile metallic components using the Equivalent Material Concept"
    Alireza Torabi, Ebrahim Pirhadi
    The 12th Conference of Iranian Aerospace Society, 2013
34. "Failure analysis of a first stage gas turbine compressor rotor blade using field evidences"
    Alireza Torabi
    5th Electric Power Generation Conference, 2013
35. "A catastrophic failure report of a gas turbine unit and failure analysis of the second row turbine moving blades using field evidences"
    Alireza Torabi
    5th Electric Power Generation Conference, 2013
36. "Determination of load-carrying capacity of qasi-brittle polymeric components containing V-notches using notch fracture mechanics"
    Alireza Torabi, امید صیفوری
    Aero 2012, 2012
37. "Failure analysis and proposing a new method for repairing gas turbine compressor disk"
    Alireza Torabi, مرتضی بیاتی
    4th Electric Power Generation Conference, 2012
38. "Fracture estimation of V-notched brittle polymers under mixed mode I/II loading"
    Alireza Torabi, ندا جوادپور
    ISME 2011, 2011
39. "Computation of notch stress intensity factors for U-notched Brazilian disc specimen under mixed mode loading"
    Alireza Torabi, محمدرضا جعفری نژاد
    10th Conference of Iranian Aerospace Institute, 2011
40. "The maximum tangential strain energy criterion for predicting brittle fracture in sharp V-shaped notches"
    مجیدرضا آیت الهی, Alireza Torabi, محمد دهقانی دهج
    ISME 2010, 2010